Page 1 of 1
LG BP50NB40 NB50 Not Flashing Correctly
Posted: Mon Nov 03, 2025 2:36 am
by Yoghurtty
Hi all,
Just used the Flash GUI to flash this drive. Followed the steps as shown. Flashed to 1.03, then recovered to BU40N 1.0. And now nothing. It wont read any disc and I have to force eject it. Just spins forever "reading" the disc no matter if its a UHD or not. Attached is a screenshot of the drive info on MakeMKV. All help is appreciated.
Thanks,
Noah
Re: LG BP50NB40 NB50 Not Flashing Correctly
Posted: Tue Nov 04, 2025 4:21 pm
by dcoke22
Yoghurtty wrote: ↑Mon Nov 03, 2025 2:36 am
Hi all,
Just used the Flash GUI to flash this drive. Followed the steps as shown. Flashed to 1.03, then recovered to BU40N 1.0. And now nothing. It wont read any disc and I have to force eject it. Just spins forever "reading" the disc no matter if its a UHD or not. Attached is a screenshot of the drive info on MakeMKV. All help is appreciated.
Thanks,
Noah
The
Ultimate UHD Drives Flashing Guide says:
WP/BP50NB40 to > BP50NB40-NB50-1.03MK then to > BP60NB10 1.02MK or 1.00MK
I'm not sure why you tried the BU40N firmware?
Re: LG BP50NB40 NB50 Not Flashing Correctly
Posted: Tue Nov 04, 2025 10:41 pm
by MartyMcNuts
dcoke22 wrote: ↑Tue Nov 04, 2025 4:21 pm
Yoghurtty wrote: ↑Mon Nov 03, 2025 2:36 am
Hi all,
Just used the Flash GUI to flash this drive. Followed the steps as shown. Flashed to 1.03, then recovered to BU40N 1.0. And now nothing. It wont read any disc and I have to force eject it. Just spins forever "reading" the disc no matter if its a UHD or not. Attached is a screenshot of the drive info on MakeMKV. All help is appreciated.
Thanks,
Noah
The
Ultimate UHD Drives Flashing Guide says:
WP/BP50NB40 to > BP50NB40-NB50-1.03MK then to > BP60NB10 1.02MK or 1.00MK
I'm not sure why you tried the BU40N firmware?
Shouldn't matter. I also prefer BU40N 1.00 over any BP60NB10 firmware and is what I put on these drives.
Yoghurtty, how old is the drive? What's the manufacture date on the sticker underneath the drive? Are you sure it is SVC NB50?
Re: LG BP50NB40 NB50 Not Flashing Correctly
Posted: Wed Nov 05, 2025 1:49 am
by Yoghurtty
MartyMcNuts wrote: ↑Tue Nov 04, 2025 10:41 pm
dcoke22 wrote: ↑Tue Nov 04, 2025 4:21 pm
Yoghurtty wrote: ↑Mon Nov 03, 2025 2:36 am
Hi all,
Just used the Flash GUI to flash this drive. Followed the steps as shown. Flashed to 1.03, then recovered to BU40N 1.0. And now nothing. It wont read any disc and I have to force eject it. Just spins forever "reading" the disc no matter if its a UHD or not. Attached is a screenshot of the drive info on MakeMKV. All help is appreciated.
Thanks,
Noah
The
Ultimate UHD Drives Flashing Guide says:
WP/BP50NB40 to > BP50NB40-NB50-1.03MK then to > BP60NB10 1.02MK or 1.00MK
I'm not sure why you tried the BU40N firmware?
Shouldn't matter. I also prefer BU40N 1.00 over any BP60NB10 firmware and is what I put on these drives.
Yoghurtty, how old is the drive? What's the manufacture date on the sticker underneath the drive? Are you sure it is SVC NB50?
The drive was manufactured April of 2018 and the box says SVC Code: NB50. Thanks for the help!