Page 1 of 1
Still Cannot flash Verbatim 4338 KIAB
Posted: Sat Mar 08, 2025 6:50 pm
by karadur
I tried to follow this topic to
viewtopic.php?t=33781 to update my firmware but not only LibreDrive is not enabled but additionally I am getting "Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive" . I utilized sdftool_flasher for updating firmware
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MODOAM85402
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Any help is much appreciate it
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Sun Mar 09, 2025 12:07 am
by MartyMcNuts
karadur wrote: ↑Sat Mar 08, 2025 6:50 pm
I tried to follow this topic to
viewtopic.php?t=33781 to update my firmware but not only LibreDrive is not enabled but additionally I am getting "Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive" . I utilized sdftool_flasher for updating firmware
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: MODOAM85402
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Any help is much appreciate it
You haven't flashed it. It is still on the original encrypted 1.05 firmware. Flash it to BU40N 1.03-MK and done.
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Sun Mar 09, 2025 10:26 pm
by karadur
Thanks Marty, the closets firmware I could find was : HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin from The All You Need firmware pack. I used SDFTool but the drive remains at LibreDrive remains as not yet enabled
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Mon Mar 10, 2025 12:15 am
by MartyMcNuts
karadur wrote: ↑Sun Mar 09, 2025 10:26 pm
Thanks Marty, the closets firmware I could find was : HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin from The All You Need firmware pack. I used SDFTool but the drive remains at LibreDrive remains as not yet enabled
What is are you using?
How is the drive connected to the pc?
What error are you getting?
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Mon Mar 10, 2025 6:36 pm
by karadur
Marty
- The drive is connected via single USB-C cable
- I used SDFtool Flasher version 1.2.0
- I point SDFtool with write option selected to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin
- After the flashing the drive, MakeMkV reports the following
Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: ...
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Attempting to use MakeMkv against a UHD disc will produce the following
Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SPTI:\Device\CdRom0'
Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
Saved AACS dump file as C:\Users\karadur/.MakeMKV/MKB20_v77_Constantine_7E82.tgz
LibreDrive compatible drive is required to open this disc - video can't be decrypted.
Failed to open disc
Thanks
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Mon Mar 10, 2025 9:21 pm
by dcoke22
karadur wrote: ↑Mon Mar 10, 2025 6:36 pm
- I used SDFtool Flasher version 1.2.0
The latest version of SDFtool Flasher is 1.3.6. Please visit the
SDFtool Flasher thread.
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Mon Mar 10, 2025 10:18 pm
by MartyMcNuts
karadur wrote: ↑Mon Mar 10, 2025 6:36 pm
Marty
- The drive is connected via single USB-C cable
- I used SDFtool Flasher version 1.2.0
- I point SDFtool with write option selected to HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin
- After the flashing the drive, MakeMkV reports the following
Drive Information
OS device name: D:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.05
Serial number: ...
Firmware date: 2124-04-23 13:47
Bus encryption flags: 17
Highest AACS version: 77
LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959
Attempting to use MakeMkv against a UHD disc will produce the following
Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SPTI:\Device\CdRom0'
Can't read AACS VID from disc - most likely current AACS host certificate is revoked by your drive
Saved AACS dump file as C:\Users\karadur/.MakeMKV/MKB20_v77_Constantine_7E82.tgz
LibreDrive compatible drive is required to open this disc - video can't be decrypted.
Failed to open disc
Thanks
If using that old version (why??) of SDFtool Flasher, you need to check the "enc" box as your drive has encrypted firmware. You should use the newer version of SDFtool Flasher as it automatically does this for you.
Re: Still Cannot flash Verbatim 4338 KIAB
Posted: Mon Mar 10, 2025 10:38 pm
by karadur
Thank you everyone. The problem was older version SDFtool. Once I used the latest version , I was able to successfully flash the drive