Flashing trouble
Posted: Fri Nov 15, 2024 11:08 pm
Hi! I'm trying to flash a drive
Unfortunatly when I run the flash command nothing really happens. I tried again with -vv (--debug gave an error?)
Any advice would be appreciated!
Code: Select all
Drive Information
OS device name: /dev/sr0
Current profile: DVD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP50NB40
Revision: 1.02
Serial number: SIM0-xxxxxxxxx
Firmware date: 2118-11-01 10:16
Bus encryption flags: 17
LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.02
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)
Code: Select all
sdftool -d '/dev/sr0' -f ./sdf_00000098.bin rawflash -i "LG slim BP50NB40-NB50/HL-DT-ST-BD-RE_BP50NB40-NB50-1.03-NM00800-212005070917.bin" -vvv
Found sdf.bin version 0x98 at ./sdf_00000098.bin
Loaded SDF.bin version 0x98
Found drive-specific logic in SDF.bin
Using (non-existing) config file at /home/xxx/.libdriveio/sdf.conf
--it sits here for seemingly as long as I will let it.