www.makemkv.com

For the life of me I cannot get WH16NS40 to flash to a supported firmware. Any help would be appreciated:

sudo makemkvcon f -d 'dev_21:2' -f /tmp/sdf.bin rawflash enc -i HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin

Input file not found -- HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin
Internal error 0x83000001

Drive Information
OS device name: /dev/sr0
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE WH16NS40
Revision: 1.05
Serial number: [redacted]
Firmware date: 2120-05-06 14:40
Bus encryption flags: 17
Highest AACS version: 68

LibreDrive Information
Status: Possible (with patched firmware)
Drive platform: MT1959
Harware support: Yes
Firmware support: No
Firmware type: Original (patched version available)
Firmware version: 1.05
DVD all regions: Possible (with patched firmware)
BD raw data read: Possible (with patched firmware)
BD raw metadata read: Possible (with patched firmware)
Unrestricted read speed: Possible (with patched firmware)

The detail in this post worked for me: viewtopic.php?f=16&t=32588


Reading input file HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin
Flashing flags = 0x0 : 0 0 0 0 : ---- ---- ---- ----
Sending image in encrypted format
Current Drive ID: HL-DT-ST_BD-RE__WH16NS40_1.05_212005061440_KL9KB6G5745
Ready to write drive flash memory.
Type "yes" to continue, "no" to abort
yes
Operation started: Sending flash image to drive
100% Operation finished
Operation started: Programming flash
100% Operation finish

You have no patch to the fw file and it can't find it