Little feedback to 3 burners that I use...
Posted: Tue Apr 19, 2022 9:16 pm
Hello team,
a small return on my UHD burners !
I have the following models :
- Asus BW-16D1HT (I used SDF Tool Flasher v1.3.3 and the firmware ASUS-BW-16D1HT-3.10-WM01601-211901041014)
- Hitachi-LG BH16NS55 (I used SDF Tool Flasher v1.3.3 to transformed it into WH16NS60 with firmware HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936)
- Pioneer BDR-S12UHT (I left it as it is, and I use Make MKV in its latest version with LibreDrive mode)
So I bought these burners in double copy !!!
I think that in the near future, unfortunately, all prices will be very high...
I strongly recommend you to buy your burner quickly.
Of course, if you intend to buy one...
Also be very careful with Chinese copies !
And yes ! There are Chinese copies of these burners...
All these models are very good but I think that the Pioneer BDR-S12UHT is the best ! ^^
Pioneer is known for its quality of engraving.
But the other burners offer a very good quality engraving.
Finally, I think that in terms of value for money, the best burner is the Hitachi-LG BH16NS55 which can be transformed into a WH16NS60
Then the Asus BW-16D1HT comes in second place !
You guessed it, the quality, to have the top, you must put the price !
The Pioneer BDR-S12UHT is the most expensive burner.
But it is the best on the engraving plan, but also on the fact, that it is much less noisy
at full speed than the other burners quoted above.
So, if you need to buy a burner, you just have to make your choice...
I hope my feedback will help you a little bit !
a small return on my UHD burners !
I have the following models :
- Asus BW-16D1HT (I used SDF Tool Flasher v1.3.3 and the firmware ASUS-BW-16D1HT-3.10-WM01601-211901041014)
- Hitachi-LG BH16NS55 (I used SDF Tool Flasher v1.3.3 to transformed it into WH16NS60 with firmware HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936)
- Pioneer BDR-S12UHT (I left it as it is, and I use Make MKV in its latest version with LibreDrive mode)
So I bought these burners in double copy !!!
I think that in the near future, unfortunately, all prices will be very high...
I strongly recommend you to buy your burner quickly.
Of course, if you intend to buy one...
Also be very careful with Chinese copies !
And yes ! There are Chinese copies of these burners...
All these models are very good but I think that the Pioneer BDR-S12UHT is the best ! ^^
Pioneer is known for its quality of engraving.
But the other burners offer a very good quality engraving.
Finally, I think that in terms of value for money, the best burner is the Hitachi-LG BH16NS55 which can be transformed into a WH16NS60
Then the Asus BW-16D1HT comes in second place !
You guessed it, the quality, to have the top, you must put the price !
The Pioneer BDR-S12UHT is the most expensive burner.
But it is the best on the engraving plan, but also on the fact, that it is much less noisy
at full speed than the other burners quoted above.
So, if you need to buy a burner, you just have to make your choice...
I hope my feedback will help you a little bit !