BU40N V1.04 flashed but not enabled?

Forum for discussions about UHD-capable dives
Post Reply
makuk
Posts: 5
Joined: Wed Aug 18, 2021 12:36 am

BU40N V1.04 flashed but not enabled?

Post by makuk »

I've attached a screenshot to try and help.

New drive in a Vantec enclosure. As you can see I've run the flash using the .bin from the latest zip in the MK thread, but it doesn't seem to have worked - can anyone provide advice please?

Thanks
Attachments
Capture.PNG
Capture.PNG (64.25 KiB) Viewed 3644 times
Woodstock
Posts: 9914
Joined: Sun Jul 24, 2011 11:21 pm

Re: BU40N V1.04 flashed but not enabled?

Post by Woodstock »

Has the hardware been reset since the flash? As in, powered off so it will re-read its firmware when it powers up?
MakeMKV Frequently Asked Questions
How to aid in finding the answer to your problem: Activating Debug Logging
Billycar11
Posts: 3769
Joined: Sun Aug 24, 2014 5:49 am

Re: BU40N V1.04 flashed but not enabled?

Post by Billycar11 »

You didn't use enc
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
makuk
Posts: 5
Joined: Wed Aug 18, 2021 12:36 am

Re: BU40N V1.04 flashed but not enabled?

Post by makuk »

Ok thanks I'll try again later with the enc flag.

Yes, tried re powering.
makuk
Posts: 5
Joined: Wed Aug 18, 2021 12:36 am

Re: BU40N V1.04 flashed but not enabled?

Post by makuk »

Sorted, thank you
Post Reply