ASUS BW-16D1HT not recognizing BDs / UHDs

Forum for discussions about UHD-capable dives
Post Reply
ChipHN
Posts: 3
Joined: Thu Apr 15, 2021 12:49 am

ASUS BW-16D1HT not recognizing BDs / UHDs

Post by ChipHN »

Hello all,
I've had an ASUS BW-16D1HT (firmware 3.01) that had been working fine with BDs & UHDs up thru January. I was able to backup the 4K UHD of Beastmaster a few months ago just fine. Now when I insert a BD or UHD, MakeMKV reports "No Disc Inserted".

Has anyone else run into this & been able to resolve?

I'm on MacOS 10.14.6.
Attached drive info from MakeMKV 1.16.3
Attachments
Screen Shot 2021-04-14 at 9.07.31 PM.png
Screen Shot 2021-04-14 at 9.07.31 PM.png (108.32 KiB) Viewed 4203 times
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: ASUS BW-16D1HT not recognizing BDs / UHDs

Post by Billycar11 »

yeah the laser dies alot on those
you can try taking it apart and cleaning the lens but i dont think that will fix it
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
ChipHN
Posts: 3
Joined: Thu Apr 15, 2021 12:49 am

Re: ASUS BW-16D1HT not recognizing BDs / UHDs

Post by ChipHN »

Hey Billy - thanks for the quick reply!
I should have mentioned that it's still reading DVDs. Is there a separate laser for DVDs, or can the laser fail to a point where it's reading DVDs, but not Blu-rays?

Thanks for any info/advice :)

Chip
Billycar11
Posts: 3766
Joined: Sun Aug 24, 2014 5:49 am

Re: ASUS BW-16D1HT not recognizing BDs / UHDs

Post by Billycar11 »

Yes 2 different lasers
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
ChipHN
Posts: 3
Joined: Thu Apr 15, 2021 12:49 am

Re: ASUS BW-16D1HT not recognizing BDs / UHDs

Post by ChipHN »

Thanks for confirming Billy - time to buy a new one!
Post Reply