SDFtool Flasher

Forum for discussions about UHD-capable dives
kingston12
Posts: 48
Joined: Wed Feb 07, 2018 11:15 am

Re: SDFtool Flasher

Post by kingston12 »

Thanks for all of the work that has been put in on this.

I've got two BU40N drives that I flashed to 1.00 years ago using the original ASUS flasher.

Is there any advantage in moving them to the 1.03 firmware using the new method, or am I just as well sticking with what I've got if they are working fine?
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

kingston12 wrote:
Sun Feb 20, 2022 4:26 pm
Thanks for all of the work that has been put in on this.

I've got two BU40N drives that I flashed to 1.00 years ago using the original ASUS flasher.

Is there any advantage in moving them to the 1.03 firmware using the new method, or am I just as well sticking with what I've got if they are working fine?
No advantage whatsoever, only disadvantages.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
abmcconnell
Posts: 4
Joined: Fri May 09, 2014 6:45 pm

Re: SDFtool Flasher

Post by abmcconnell »

Hi,

Looks like there are now 3 options for the BU40N. 1.0, 1.03 and 1.04

Which is preferred and why, please?

Can anyone point me to an explanation of MK versus DE versus HL formats?

I see a few bits at the top of this thread, curious to learn more.
Last edited by abmcconnell on Mon Feb 21, 2022 6:04 pm, edited 1 time in total.
kingston12
Posts: 48
Joined: Wed Feb 07, 2018 11:15 am

Re: SDFtool Flasher

Post by kingston12 »

MartyMcNuts wrote:
Sun Feb 20, 2022 10:39 pm
kingston12 wrote:
Sun Feb 20, 2022 4:26 pm
Thanks for all of the work that has been put in on this.

I've got two BU40N drives that I flashed to 1.00 years ago using the original ASUS flasher.

Is there any advantage in moving them to the 1.03 firmware using the new method, or am I just as well sticking with what I've got if they are working fine?
No advantage whatsoever, only disadvantages.
Thanks, I'll stick with what I've got!
bawjaws
Posts: 1
Joined: Tue Feb 22, 2022 4:15 pm

Re: SDFtool Flasher

Post by bawjaws »

Greetings! Newbie here, having just got a BP55EB40 from Amazon. I followed the instructions at the top of the thread (honest, I did!): flashed to BP50NB40 1.03-MK, then flashed to BP50NB40 1.03-MK, with boot ticked, then tried to crossflash via RECOVERY to BP60NB10 1.00-MK...

BUT...the only firmware in the MK-Firmware-Pack for BP60NB10 is 1.02MK.

I used this one, and it seemed to complete but at the end I got the error message with an error code of 0x8f062900.

MakeMKV seems to have updated the Info section to show that the flash has been completed successfully, but error codes with random hex numbers are never a good way to leave things, so I'm a bit worried :-)

It seems to be reading a 4K disc OK at the moment, but I've yet to actually rip it.
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

bawjaws wrote:
Tue Feb 22, 2022 4:46 pm
Greetings! Newbie here, having just got a BP55EB40 from Amazon. I followed the instructions at the top of the thread (honest, I did!): flashed to BP50NB40 1.03-MK, then flashed to BP50NB40 1.03-MK, with boot ticked, then tried to crossflash via RECOVERY to BP60NB10 1.00-MK...

BUT...the only firmware in the MK-Firmware-Pack for BP60NB10 is 1.02MK.

I used this one, and it seemed to complete but at the end I got the error message with an error code of 0x8f062900.

MakeMKV seems to have updated the Info section to show that the flash has been completed successfully, but error codes with random hex numbers are never a good way to leave things, so I'm a bit worried :-)

It seems to be reading a 4K disc OK at the moment, but I've yet to actually rip it.
BP60NB10 1.00-MK is in the "old" folder of the MK firmware pack. Anyway, you should be good to go. If you are really worried about it, you could complete the last flash again (BP60NB10 1.02-MK or BP60NB10 1.00-MK) and see if the error appears again.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

Hi everyone,

Just letting you know the SDFtool Flasher has an update. The latest version is v1.3.2. Download link has been updated in the first post.

This latest update improves encrypted firmware detection. (I have not touched the encryption flag toggle ability, just in case it is needed for a particular drive.)
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
Wolf359
Posts: 47
Joined: Fri Dec 11, 2020 3:19 am

Re: SDFtool Flasher

Post by Wolf359 »

Does the flasher need to be run in admin mode to work?
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

Wolf359 wrote:
Sat Mar 12, 2022 5:28 pm
Does the flasher need to be run in admin mode to work?
Not normally. If you are not admin on your PC, then probably.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
Bilbo
Posts: 2
Joined: Sun Mar 13, 2022 5:26 am

Re: SDFtool Flasher

Post by Bilbo »

Hi, thanks for the tool!
I'm trying to read/play/rip UHDs
forgive me if I missed the answer, I combed through 33 pages.

me:
Win10 x64 (administrator)
Model: HL-DT-ST_BD-RE_BU40N_1.02_212012011716_MOEL91I1100
https://www.amazon.com/gp/product/B07BC9F98J/
the Archgon.
connected via USB. Slimline.

Firmware chosen: DE_LG_BU40N_1.00
results:
"Command produced error code 0x8f052603"

please help
:(
Wolf359
Posts: 47
Joined: Fri Dec 11, 2020 3:19 am

Re: SDFtool Flasher

Post by Wolf359 »

@MartyMcNuts thanks for making and maintaining this tool for us! I used it today and encountered no problems at all!! Thanks. :D
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

Bilbo wrote:
Sun Mar 13, 2022 5:32 am
Hi, thanks for the tool!
I'm trying to read/play/rip UHDs
forgive me if I missed the answer, I combed through 33 pages.

me:
Win10 x64 (administrator)
Model: HL-DT-ST_BD-RE_BU40N_1.02_212012011716_MOEL91I1100
https://www.amazon.com/gp/product/B07BC9F98J/
the Archgon.
connected via USB. Slimline.

Firmware chosen: DE_LG_BU40N_1.00
results:
"Command produced error code 0x8f052603"

please help
:(
Make sure there is no disc in the drive and the tray is closed.
Make sure you using the latest version of the SDFtool flasher, which does detect the Archgon 1.02 firmware as encrypted.
You can't flash 1.00 directly. Flash to 1.03-MK first, then flash to 1.00.
Last edited by MartyMcNuts on Sun Mar 13, 2022 10:46 pm, edited 1 time in total.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
Billycar11
Posts: 3745
Joined: Sun Aug 24, 2014 5:49 am

Re: SDFtool Flasher

Post by Billycar11 »

MartyMcNuts wrote:
Sun Mar 13, 2022 9:14 pm
Bilbo wrote:
Sun Mar 13, 2022 5:32 am
Hi, thanks for the tool!
I'm trying to read/play/rip UHDs
forgive me if I missed the answer, I combed through 33 pages.

me:
Win10 x64 (administrator)
Model: HL-DT-ST_BD-RE_BU40N_1.02_212012011716_MOEL91I1100
https://www.amazon.com/gp/product/B07BC9F98J/
the Archgon.
connected via USB. Slimline.

Firmware chosen: DE_LG_BU40N_1.00
results:
"Command produced error code 0x8f052603"

please help
:(
Make sure there is no disc in the drive and the tray is closed.

Make sure you using the latest version of the SDFtool flasher, which does detect the Archgon 1.02 firmware as encrypted.
1.00 won't work direct follow the guides recommend flashing sequence
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
MartyMcNuts
Posts: 2434
Joined: Wed Nov 22, 2017 11:45 pm

Re: SDFtool Flasher

Post by MartyMcNuts »

Billycar11 wrote:
Sun Mar 13, 2022 10:28 pm
MartyMcNuts wrote:
Sun Mar 13, 2022 9:14 pm
Bilbo wrote:
Sun Mar 13, 2022 5:32 am
Hi, thanks for the tool!
I'm trying to read/play/rip UHDs
forgive me if I missed the answer, I combed through 33 pages.

me:
Win10 x64 (administrator)
Model: HL-DT-ST_BD-RE_BU40N_1.02_212012011716_MOEL91I1100
https://www.amazon.com/gp/product/B07BC9F98J/
the Archgon.
connected via USB. Slimline.

Firmware chosen: DE_LG_BU40N_1.00
results:
"Command produced error code 0x8f052603"

please help
:(
Make sure there is no disc in the drive and the tray is closed.

Make sure you using the latest version of the SDFtool flasher, which does detect the Archgon 1.02 firmware as encrypted.
1.00 won't work direct follow the guides recommend flashing sequence
Yep, geez, how'd I miss that!! I've edited my post.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG) & DIY Single Drive Flasher (WW): https://www.uhdenableddrives.com
Bilbo
Posts: 2
Joined: Sun Mar 13, 2022 5:26 am

Re: SDFtool Flasher

Post by Bilbo »

MartyMcNuts wrote:
Sun Mar 13, 2022 9:14 pm
Bilbo wrote:
Sun Mar 13, 2022 5:32 am
Hi, thanks for the tool!
I'm trying to read/play/rip UHDs
forgive me if I missed the answer, I combed through 33 pages.

me:
Win10 x64 (administrator)
Model: HL-DT-ST_BD-RE_BU40N_1.02_212012011716_MOEL91I1100
https://www.amazon.com/gp/product/B07BC9F98J/
the Archgon.
connected via USB. Slimline.

Firmware chosen: DE_LG_BU40N_1.00
results:
"Command produced error code 0x8f052603"

please help
:(
Make sure there is no disc in the drive and the tray is closed.
Make sure you using the latest version of the SDFtool flasher, which does detect the Archgon 1.02 firmware as encrypted.
You can't flash 1.00 directly. Flash to 1.03-MK first, then flash to 1.00.
flawless victory!! Woooo I'm now watching the 1st 4k UHD blu-ray title I've ever purchased! Worked great, thanks again guys for all your help!
P.S. For this drive, should I stick w/ this firmware as-is, or is there another cross-type I should flash w/ (to get faster reads of UHDs?)
Thanks again!!
Post Reply