www.makemkv.com

Jeannozt wrote: ↑

Wed Jun 29, 2022 12:05 pm

Dear all

hope that somebody can help me.
I mean that my drive is a LG BU40N

I've tried to flash him via MAC OS
All has worked as described, but I'm still not allowed to copy UHD disks



Thanks a lot for any help

Billycar11 wrote: ↑

Wed Jun 29, 2022 1:12 pm

Jeannozt wrote: ↑

Wed Jun 29, 2022 12:05 pm

Dear all

hope that somebody can help me.
I mean that my drive is a LG BU40N

I've tried to flash him via MAC OS
All has worked as described, but I'm still not allowed to copy UHD disks



Thanks a lot for any help

Your drive is not flashed be sure to use enc

Chatomarocoloco wrote: ↑

Wed Jun 29, 2022 2:49 pm

I have the Pioneer BDR-S12UHT recorder and player. Read original UHD blu-ray but could not play due to processor issue.
The problem is that I want to remove the anti copy with MakeMKV and I get the error shown in the image. Is this model compatible?
or the error is due to something else that I do not know.

a greeting.

d00zah wrote: ↑

Wed Jun 29, 2022 5:27 pm

Chatomarocoloco wrote: ↑

Wed Jun 29, 2022 2:49 pm

I have the Pioneer BDR-S12UHT recorder and player. Read original UHD blu-ray but could not play due to processor issue.
The problem is that I want to remove the anti copy with MakeMKV and I get the error shown in the image. Is this model compatible?
or the error is due to something else that I do not know.

a greeting.

Read through the UHD FAQ, particularly the Hashed Keys section.

MrTCT83 wrote: ↑

Thu Jun 30, 2022 3:58 pm

This is the case and circuit board of it,with the flasher gui and the firmware that may be the ones for me. I was hoping to not get the sleep bug,so i wondered the DE firmware. Also wondered if the rom/drive will eventually call it a night after a while or is this just a rumor. As you can see i have the 2 firmware that seem relevant to me in the same folder as the gui(or if i should go with some other firmware in the firmware packs,but is it better have the folder on my system hdd or does it not matter. Just wanted to show the case,and/or if i have to install it directly to the cabinet or is this case ok?. And when i start the gui is it something i need to check like enc or make a dump of original?

I have read a bunch so i hope i have understood correctly,thanks

TC.

MrTCT83 wrote: ↑

Fri Jul 01, 2022 11:26 am

Hi again!

It cant read the discs or open on DE 1.00 firmware.Tried two movies and one is not detected at all,the other is detected and but fails to open. (ready player one and prince of darkness is the movies btw)

MartyMcNuts wrote: ↑

Fri Jul 01, 2022 11:53 pm

MrTCT83 wrote: ↑

Fri Jul 01, 2022 11:26 am

Hi again!

It cant read the discs or open on DE 1.00 firmware.Tried two movies and one is not detected at all,the other is detected and but fails to open. (ready player one and prince of darkness is the movies btw)

Try cleaning your discs. It is rare for a UHD disc to not need cleaning as more often than not there can be an invisible to the eye film residue left on the disc from processing. First, try wiping the disc with a microfibre cloth. If it still won't read, try a more thorough cleaning using sopay water and dry with a microfibre cloth.

MrTCT83 wrote: ↑

Sat Jul 02, 2022 12:26 am

MartyMcNuts wrote: ↑

Fri Jul 01, 2022 11:53 pm

MrTCT83 wrote: ↑

Fri Jul 01, 2022 11:26 am

Hi again!

It cant read the discs or open on DE 1.00 firmware.Tried two movies and one is not detected at all,the other is detected and but fails to open. (ready player one and prince of darkness is the movies btw)

Try cleaning your discs. It is rare for a UHD disc to not need cleaning as more often than not there can be an invisible to the eye film residue left on the disc from processing. First, try wiping the disc with a microfibre cloth. If it still won't read, try a more thorough cleaning using sopay water and dry with a microfibre cloth.

Hi Marty!

Im sending the error i get from mkv here. Tried a bunch now still all same answer as in the photo:( The discs is almost never used brand new for the most part,but taken out maybe once or twice for viewing it with my blu ray player.

TC

MartyMcNuts wrote: ↑

Sat Jul 02, 2022 12:35 am

MrTCT83 wrote: ↑

Sat Jul 02, 2022 12:26 am

MartyMcNuts wrote: ↑

Fri Jul 01, 2022 11:53 pm

Try cleaning your discs. It is rare for a UHD disc to not need cleaning as more often than not there can be an invisible to the eye film residue left on the disc from processing. First, try wiping the disc with a microfibre cloth. If it still won't read, try a more thorough cleaning using sopay water and dry with a microfibre cloth.

Hi Marty!

Im sending the error i get from mkv here. Tried a bunch now still all same answer as in the photo:( The discs is almost never used brand new for the most part,but taken out maybe once or twice for viewing it with my blu ray player.

TC

Lines 5 & 6 are what you need to take notice of. Line 6 tells you that the VUK for this disc is unknown and can't be decrypted. Line 5 tells you that MakeMKV has saved a dump file for you to send in.

Before doing any of this, please make sure that you have checked the box to allow MakeMKV internet access in preferences so that the VUK's for UHD discs can be downloaded. You cannot decrypt any UHD discs without them.

Once you have enabled internet access, try again.