BU40N Reports Successful Flash Without Actually Updating

Forum for discussions about UHD-capable dives
Post Reply
darknight
Posts: 3
Joined: Thu Dec 23, 2021 8:30 pm

BU40N Reports Successful Flash Without Actually Updating

Post by darknight » Thu Dec 23, 2021 8:40 pm

I just purchase BU40N and Vantec NST-510S3-BK 9.5mm Slim SATA Case from Amazon. I tried flashing using both makemkvcon64 and SDF tool and both of them said it was successful but the firmware hadn't actually changed.

The firmware I tried was:
HL-DT-ST-BD-RE_BU40N-1.03-NM00000-211810241934.bin
HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin

Code: Select all

Drive Information
OS device name: I:
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.02
Serial number: MO6LXXXXXXX
Firmware date: 2120-12-01 17:16
Bus encryption flags: 1F
Highest AACS version: 76

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

No disc inserted
Does anyone have an idea why this is happening to me?

Woodstock
Posts: 10338
Joined: Sun Jul 24, 2011 11:21 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by Woodstock » Thu Dec 23, 2021 10:26 pm

Did you reset the drive (power it down) after flashing? The new firmware will not load until the drive reboots.

darknight
Posts: 3
Joined: Thu Dec 23, 2021 8:30 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by darknight » Thu Dec 23, 2021 10:55 pm

Woodstock wrote:
Thu Dec 23, 2021 10:26 pm
Did you reset the drive (power it down) after flashing? The new firmware will not load until the drive reboots.
I did and even tried on another computer.

Additional Information:
Amazon Link of the Drive:
https://www.amazon.com/HLDS-BU40N-Inter ... B07BSF41VW
It was built in Aug 2021.

Billycar11
Posts: 4359
Joined: Sun Aug 24, 2014 5:49 am

Re: BU40N Reports Successful Flash Without Actually Updating

Post by Billycar11 » Fri Dec 24, 2021 12:45 am

That's a bit strange if it was build aug 21 it should have 1.04 but it has 1.02 but I also don't think 1.02 was originally from 2020
This maybe another case like the nb52 but just in case try it with enc if you haven't already
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com

darknight
Posts: 3
Joined: Thu Dec 23, 2021 8:30 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by darknight » Fri Dec 24, 2021 1:02 am

Billycar11 wrote:
Fri Dec 24, 2021 12:45 am
That's a bit strange if it was build aug 21 it should have 1.04 but it has 1.02 but I also don't think 1.02 was originally from 2020
This maybe another case like the nb52 but just in case try it with enc if you haven't already
Hi Billy, I didn't try the ENC option because I didn't think 1.02 would have been encrypted. Guess what? It worked!

I know people were asking about the HLDS BU40N drives on these forums. Does that mean that the newer HLDS drives run an encrypted 1.02? Anyway, we have the answer if anyone asks.

paz1200
Posts: 1
Joined: Thu Dec 30, 2021 1:07 am

Re: BU40N Reports Successful Flash Without Actually Updating

Post by paz1200 » Thu Dec 30, 2021 1:11 am

Thanks Billy and darknight. I bought a BU40N off of Amazon and it had the same build date and firmware version. I also wasn't able to get the MK firmware to apply, but setting enc also did the trick. SDF Tool didn't recognize it as an encrypted firmware. Perhaps it's checking by version number? In any case, makemkvcon64 did the trick.

woogs
Posts: 1
Joined: Fri Jan 07, 2022 5:35 am

Re: BU40N Reports Successful Flash Without Actually Updating

Post by woogs » Fri Jan 07, 2022 5:39 am

I had this same issue. For anyone that can't find the enc checkbox. It appears to be gone from SDFtool flasher 1.3 but it is on 1.2, I was able to use 1.2 to flash.

mkv_andy
Posts: 2
Joined: Fri Jan 07, 2022 3:50 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by mkv_andy » Fri Jan 07, 2022 4:01 pm

Thank you for the clarification. I am having the same problem on a mac.

How do I activate the enc option on the command line?

More context: I am using `makemkvcon f -l` and then `makemkvcon f -d drivename rawflash main -i firmware.bin` I am quite confident that I have the general things right, because I can flash an older drive of the same kind (BU40N 1.03 Dec 2019 vs BU40N 1.04 Mar 2021) in the same enclosure.

mkv_andy
Posts: 2
Joined: Fri Jan 07, 2022 3:50 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by mkv_andy » Fri Jan 07, 2022 9:22 pm

I found it in another post myself. Just use ´enc´ instead of ´main´, i.e.

Code: Select all

./makemkvcon f -d drivename -f sdf.bin rawflash enc -i firmware.bin
I am not sure if it is possible to also omit `-f sdf.bin` But now it works and I do not want to force my luck 8)

dooferorg
Posts: 13
Joined: Thu Jul 30, 2020 8:21 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by dooferorg » Sun Jan 09, 2022 5:36 am

Just as an 'FYI' I recently bought an LG BU40N from Amazon and the manufacture date is May 2021. Firmware version 1.04. Successfully flashed with the HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin file from the MK firmware pack using SDFToolFlasher 1.3.1

tsu238
Posts: 1
Joined: Sat Jan 15, 2022 11:03 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by tsu238 » Sat Jan 15, 2022 11:37 pm

Well I thought I got mine to work based on mkv_andy and his advice about flashing it using enc instead of main. It did flash and now I have my Libredrive info displaying:

Drive Information
OS device name: /dev/rdisk2
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BU40N
Revision: 1.04
Serial number: MOEL91D4042
Firmware date: 2120-05-06 11:42
Bus encryption flags: 17
Highest AACS version: 56

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.04
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

I did power off the drive (unplugging the USB and plugging back in). Closed MakeMKV and re-opened and again, my info showed. I used a BluRay and it read the disc and gave me the options to "download," but it eventually gives me the Error, Cant copy kinda message. I'm using a MAC and used terminal with "./makemkvcon f -d '/IOBDServices/AC377684' -f /tmp/sdf.bin rawflash enc -i /tmp/HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin". At a loss now. Any advice would be terrific.

dcoke22
Posts: 3118
Joined: Wed Jul 22, 2020 11:25 pm

Re: BU40N Reports Successful Flash Without Actually Updating

Post by dcoke22 » Sun Jan 16, 2022 12:30 am

tsu238 wrote:
Sat Jan 15, 2022 11:37 pm
LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.04
If that's what MakeMKV tells you about your drive, then LibreDrive is enabled and you shouldn't need to flash your drive again.

A BU40N will rip a regular blu-ray without flashing. LibreDrive is needed to be able to rip UHDs.

If MakeMKV encountered an error while trying to rip your blu-ray, which is entirely possible, that's probably due to the disc being dirty and needing to be gently cleaned and not due to a firmware issue. If you can post your MakeMKV log, we can take a look. The bottom portion of the MakeMKV window is selectable. Control-Click or Right-Click to copy it.

Post Reply