Forum for discussions about UHD-capable dives
-
anonymouse
- Posts: 3
- Joined: Wed Apr 08, 2020 7:52 pm
Post
by anonymouse » Tue Aug 17, 2021 5:37 pm
I have a LG drive that isn't flashing
- IMG_1829-2.png (2.77 MiB) Viewed 9259 times
It claims to flash ok :
Code: Select all
PS C:\Program Files (x86)\MakeMKV> .\makemkvcon64.exe f --all-yes -d F: rawflash -i C:\Users\johnk\Downloads\HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin
Reading input file C:\Users\johnk\Downloads\HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin
Flashing flags = 0x0 : 0 0 0 0 : ---- ---- ---- ----
Current Drive ID: HL-DT-ST_BD-RE__WH16NS60_1.03_212005081010_XXXXXXXXXX
Ready to write drive flash memory. (auto confirmed)
Operation started: Sending flash image to drive
100% Operation finished
Operation started: Programming flash
100% Operation finished
Done successfully
PS C:\Program Files (x86)\MakeMKV>
But when I try it afterwards it still lists the original firmware and doesn't work :
Anyone got any suggestions?
-
Attachments
-
- makemkv.png (129.02 KiB) Viewed 9259 times
-
Coopervid
- Posts: 1955
- Joined: Tue Feb 19, 2019 10:32 pm
Post
by Coopervid » Tue Aug 17, 2021 6:49 pm
You have to add the "enc" option since your original firmware is encrypted. Good Luck!
-
d00zah
- Posts: 1587
- Joined: Mon Jun 06, 2016 8:23 pm
Post
by d00zah » Tue Aug 17, 2021 6:58 pm
Per the
Ultimate UHD Drives Flashing Guide Updated 2021
Newer OEM Firmwares and encrypted:
New Encrypted firmware
List of Know Encrypted firmware (so far,
any firmware with date in 2020 is encrypted)
HL-DT-ST-BD-RE_WH16NS60-1.03-N000600-212005081010.bin
Change your command line to include the 'enc' switch...
.\makemkvcon64.exe f --all-yes -d F: rawflash
enc -i C:\Users\johnk\Downloads\HL-DT-ST-BD-RE_WH16NS60-1.02-NM00100-211810291936.bin
Last edited by
d00zah on Tue Aug 17, 2021 7:58 pm, edited 1 time in total.
-
anonymouse
- Posts: 3
- Joined: Wed Apr 08, 2020 7:52 pm
Post
by anonymouse » Tue Aug 17, 2021 7:52 pm
Thanks guys, that's done the business - up and working now!
-
hardcore_gamer29
- Posts: 49
- Joined: Sun Aug 08, 2021 5:23 pm
Post
by hardcore_gamer29 » Sat Jan 15, 2022 7:31 am
anonymouse wrote: ↑Tue Aug 17, 2021 7:52 pm
Thanks guys, that's done the business - up and working now!
do i need to do all this as it is already official uhd drive for my intel i9 10900k system?
-
Billycar11
- Posts: 4368
- Joined: Sun Aug 24, 2014 5:49 am
Post
by Billycar11 » Sat Jan 15, 2022 7:47 am
hardcore_gamer29 wrote: ↑Sat Jan 15, 2022 7:31 am
do i need to do all this as it is already official uhd drive for my intel i9 10900k system?
no we made all these guides and stuff for no reason when we were bored to confuse the new people /s
-
hardcore_gamer29
- Posts: 49
- Joined: Sun Aug 08, 2021 5:23 pm
Post
by hardcore_gamer29 » Sat Jan 15, 2022 7:59 am
Billycar11 wrote: ↑Sat Jan 15, 2022 7:47 am
hardcore_gamer29 wrote: ↑Sat Jan 15, 2022 7:31 am
do i need to do all this as it is already official uhd drive for my intel i9 10900k system?
no we made all these guides and stuff for no reason when we were bored to confuse the new people /s
LOL
-
greifunk
- Posts: 2
- Joined: Fri Feb 04, 2022 3:27 am
Post
by greifunk » Fri Feb 04, 2022 3:34 am
Thanks so much! I was having issues with my flashing my drive in Linux as well until I found this thread.
For those that may need this help, I ran the following as above and was able to downgrade my 1.05 drive to 1.02 using:
./makemkvcon f --all-yes -d drivename -f /path/to/sdf.bin rawflash enc -i /path/to/flash-file.bin
I hope that helps someone else if they run into this issue!
-
hardcore_gamer29
- Posts: 49
- Joined: Sun Aug 08, 2021 5:23 pm
Post
by hardcore_gamer29 » Sun Feb 06, 2022 8:14 pm
anonymouse wrote: ↑Tue Aug 17, 2021 7:52 pm
Thanks guys, that's done the business - up and working now!
which version you used mine also has 1.03. please tell