Pioneer BDR-XS07TUHD flashable?

Forum for discussions about UHD-capable dives
Post Reply
Message
Author
Marsianer
Posts: 2
Joined: Thu Oct 17, 2024 2:52 pm
Location: Germany

Pioneer BDR-XS07TUHD flashable?

#1 Post by Marsianer » Thu Oct 17, 2024 3:04 pm

Hello MakeMKV-community,
this is my first post and as usual its a request for support :D

Recently I bought a Verbatim 43888 and it works just fine ripping 4k UHD in MakeMKV. Nevertheless, it is quite loud and slow. Additionally, I do not like the way it opens up. It seems not that well built.
Therefore I searched a bit and found a Pioneer BDR-XS07TUHD.
The seller was so kind to check the drive information with MakeMKV and I am not sure if it can be flashed or not. Even though the label on the drive states a manufacturing date of October 2020, it seems that the firmware was updated at some time. Below you see the export out of MakeMKV:

Drive Information
OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.03
Serial number: "Removed"
Firmware date: 2023-01-06
Bus encryption flags: 13
Highest AACS version: 63

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: RS8E21
Firmware version: ID05


Can someone maybe help me to decide if I should buy the drive or not. A short info how the flashing is done would be much appreciated as well.

THANKS :)
Last edited by Marsianer on Thu Oct 17, 2024 5:30 pm, edited 1 time in total.

Woodstock
Posts: 10326
Joined: Sun Jul 24, 2011 11:21 pm

Re: Pioneer BDR-XS07TUHD flashable?

#2 Post by Woodstock » Thu Oct 17, 2024 4:02 pm

Pioneer, built after 12/22/2022, not flashable, so no-go for UHD.

Marsianer
Posts: 2
Joined: Thu Oct 17, 2024 2:52 pm
Location: Germany

Re: Pioneer BDR-XS07TUHD flashable?

#3 Post by Marsianer » Thu Oct 17, 2024 7:42 pm

Hi Woodstock,

I missed a "0" in my post. :D
I guess even though the drive was manufactured in 2020, the blocking factor ist the newer FW correct?

MartyMcNuts
Posts: 2870
Joined: Wed Nov 22, 2017 11:45 pm

Re: Pioneer BDR-XS07TUHD flashable?

#4 Post by MartyMcNuts » Thu Oct 17, 2024 9:28 pm

Marsianer wrote:
Thu Oct 17, 2024 3:04 pm
Hello MakeMKV-community,
this is my first post and as usual its a request for support :D

Recently I bought a Verbatim 43888 and it works just fine ripping 4k UHD in MakeMKV. Nevertheless, it is quite loud and slow. Additionally, I do not like the way it opens up. It seems not that well built.
Therefore I searched a bit and found a Pioneer BDR-XS07TUHD.
The seller was so kind to check the drive information with MakeMKV and I am not sure if it can be flashed or not. Even though the label on the drive states a manufacturing date of October 2020, it seems that the firmware was updated at some time. Below you see the export out of MakeMKV:

Drive Information
OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-XS07U
Revision: 1.03
Serial number: "Removed"
Firmware date: 2023-01-06
Bus encryption flags: 13
Highest AACS version: 63

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: RS8E21
Firmware version: ID05


Can someone maybe help me to decide if I should buy the drive or not. A short info how the flashing is done would be much appreciated as well.

THANKS :)
No the firmware had been updated, so no go. It must pre-date Dec 2022. DO NOT BUY IT if you want to rip UHD discs.
Cheers :D
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com

Post Reply