Ultimate UHD Drives Flashing Guide Updated 2025

[Billycar11]

I appreciate your quick replies and help. I tried refreshing multiple times. Each time it says the flash is successful but the Status hasn't changed to enable. Below is what the terminal output looks like (This is on a Mac mini M2). I followed the Mac flashing command instructions under the "How To Flash Videos and commands:" section on this guide.

Do I need to revert back to the original firmware (not sure where to get the from) before attempting to flash back?

Code: Select all

MacOS % ./makemkvcon f -d '/IOBDServices/2D033E1B' -f /tmp/sdf.bin rawflash main -i /tmp/HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin

Reading input file /tmp/HL-DT-ST-BD-RE_BP60NB10-1.02-NM00800-212005070935.bin
Flashing flags = 0x0 : 0 0 0 0 : ---- ---- ---- ----
Current Drive ID: HL-DT-ST_BD-RE_BP60NB10_1.02_212107081556_SIM04OBKC5309
Using USB chipset workaround for Desktop drive handshake
Ready to write drive flash memory.
Type "yes" to continue, "no" to abort
yes
Operation started: Sending flash image to drive
 100% Operation finished                                
Operation started: Programming flash
 100% Operation finished                                
Done successfully

you forgot enc

[cf1084]

I bought this unit and was able to record a UHD BD (so it says on the box), but I tried other movies and it doesn't read them... what can I do?


Drive Information
OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-213M
Revision: 1.05
Serial number: ****
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS9200
Firmware version: ID56

[Billycar11]

I bought this unit and was able to record a UHD BD (so it says on the box), but I tried other movies and it doesn't read them... what can I do?


Drive Information
OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-213M
Revision: 1.05
Serial number: ****
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS9200
Firmware version: ID56

nah you didnt read a UHD with that
you did a regular BD

[cf1084]

U rigth i realized after the post ‍‍… however is anything i can do to read the UHD??

[Mr_Orange]

I bought this unit and was able to record a UHD BD (so it says on the box), but I tried other movies and it doesn't read them... what can I do?


Drive Information
OS device name: E:
Manufacturer: PIONEER
Product: BD-RW BDR-213M
Revision: 1.05
Serial number: ****
Firmware date: 2023-08-01
Bus encryption flags: 1B
Highest AACS version: 68

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: Pioneer RS9200
Firmware version: ID56

nah you didnt read a UHD with that
you did a regular BD

He said "record" not "rip", unless he meant "rip".

[Billycar11]

He said "record" not "rip", unless he meant "rip".

i didnt say rip but yeah that drive will not see a UHD disc at all unless you buy it from me marty or asmcom and the drive info will not look like that at all

its not an official UHD drive so it does not see those discs

[Mr_Orange]

He said "record" not "rip", unless he meant "rip".

i didnt say rip but yeah that drive will not see a UHD disc at all unless you buy it from me marty or asmcom and the drive info will not look like that at all

its not an official UHD drive so it does not see those discs

True, you said "read" but fundamentally there is no difference between "read" and "rip" since ripping requires reading. If the drive doesn't even recognise a UHD then, I concede, that it wouldn't record either.

[shinkiro]

Hi guys, I just got the Buffalo Japanese drive "BRUHD-PU3" (external) but I don't know which tool or firmware to use to read UHD blu-ray discs.

Do I use the flasher on this thread: viewtopic.php?f=16&t=22896 or something else entirely?

I saw that "MartyMcNuts" said to use "1. HL-DT-ST-BD-RE_BU40N-BU12-OM01001-211902230922.bin
2. DE_Buffalo_BRUHD-PU3_BU10 OR DE_LG_BU40N_1.00", so any of these three firmwares work?

Show drive information with MakeMKV.

Here you go:

Drive Information
OS device name: M:
Current profile: DVD-ROM
Manufacturer: BUFFALO
Product: Optical Drive
Revision: BU14
Serial number: MO7NBNG5633
Firmware date: 2121-06-21 13:30
Bus encryption flags: 1F

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

[zittrig]

Try flashing with LG BU40N 1.03MK.

[DrakkerFlight]

Oh wow I guess I missed this firmware was on the encrypted list. Add enc seems to have fixed the issue. Thank you!