Just got a new old stock BW-16D1HT that was manufactured in May of 2017 and has 3.01 on it. I want to rip uhd and bluray. What firmware do I put on it?
MK > ASUS > BW-16D1HT > ASUS-BW-16D1HT-3.10-WM01601-211901041014.bin
Links to various Windows-based flashing tools are linked in the 1st post of this thread... Ultimate UHD Drives Guide Updated 2020 . Refer to section "Unlocked Flashers, Downgrade Enabled Firmware and MK Firmware:".
Just got a new old stock BW-16D1HT that was manufactured in May of 2017 and has 3.01 on it. I want to rip uhd and bluray. What firmware do I put on it?
You don't need any firmware you already have one that will work
Just got a new old stock BW-16D1HT that was manufactured in May of 2017 and has 3.01 on it. I want to rip uhd and bluray. What firmware do I put on it?
As Billycar11 said, 3.01 is already UHD compatible.
Cheers
----------------------------------------------------------------------------------------------------------------------------
For UHD enabled drives (AU/NZ/SG + Others) & DIY Single Drive Flasher (WW): https://uhdenableddrives.com
Just got a new old stock BW-16D1HT that was manufactured in May of 2017 and has 3.01 on it. I want to rip uhd and bluray. What firmware do I put on it?
Nice score! Please do not load any firmware on it you are good to go and that thing is a collectors item!
First time poster here. I've been using MakeMKV for about 9 months now, and have had amazing success with it while building my Plex server. A few months ago I upgraded my server PC, and thought that it would also be good to add some UHD media to it as well. I have the ASUS BW-16D1HT, and back in May I was able to rip about 10-12 4K discs after following the instructions on this thread (Dark Knight Trilogy, Braveheart, Inception, Interstellar, Saving Private Ryan, etc.).
Recently though, I have been having an issue that I cannot seem to find a solution for. On Thursday I purchased the Forrest Gump 25th Anniversary edition in 4K, and no matter what I try, the disc is not recognized by my drive. I originally flashed to the 3.02 firmware back in May, that's how I was able to get the other 4K discs to rip, and have tried the 3.10-MK FW, 3.03-MK, as well as WH16NS60 1.02 and 1.03 after reading through some of the later posts on this thread. All of these gave me zero luck with Forrest Gump. I am currently on MakeMKV v1.15.2(x64-release), and the drive is only a few months old.
If someone has posted this problem in an earlier post, and a solution has been found, I apologize for the repeat post. I have not gone through all 44 pages of this thread just yet. I also found another thread talking about an issue with the Forrest Gump 4K 25th Anniversary edition, and a dump was submitted, but updating to the latest version of MakeMKV didn't solve my issue, so I wanted to see if anyone else had any luck in other ways.
Any help in this matter is highly appreciated. Forrest Gump is one of my favorite movies, and I must have it in 4K! Especially since I just worked through the issues I was having with 4K playback (That's a whole other story).
Clean the disc
Clean the laser on drive
Get new disc
Get new drive
Thanks for the advice. I cleaned the disk with no success. Other UHD Discs still work, so I have purchased a second copy. It will be here Thursday, and hopefully I will have better luck with that.
Thanks for the advice. I cleaned the disk with no success. Other UHD Discs still work, so I have purchased a second copy. It will be here Thursday, and hopefully I will have better luck with that.
Triple layer discs can be a pain. I've got 3 drives, 2 ns60 and one Asus, all flashed with ns60 1.00 firmware and reripping all my Dolby vision titles over the weekend was challenging. Yes with 3 drives.
Thanks for the advice. I cleaned the disk with no success. Other UHD Discs still work, so I have purchased a second copy. It will be here Thursday, and hopefully I will have better luck with that.
That's good info to know for the future. The UHD movie I tested, to see if the drive was still reading UHD at all, was Inception, which, according to the website you linked in your post, is also BD100.
The flasher & firmware pack link in the original post has been updated with the latest MK firmware pack (20/07/2020).
Thanks for the tip. I actually was using the most recent versions, as I downloaded the pack on the 24th or 25th. Still no luck with that, but I have hope for the fresh copy of the movie arriving on Thursday.
