ASUS BW-16D1HT

[berrnard]

got a asus 16d1ht that has 3.11 on it. am i sol? or doing something wrong?
tried reading and searching the forums but i feel like im missing something.
i have tried the powershell method trying the MK firmware pack, also the "all you need pack". both went to 100% and "done successfully" was shown. but going back into mkv the drive is still at 3.11

current MKV settings
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.11
Serial number: redacted
Firmware date: 2120-12-01 17:59
Bus encryption flags: 1F
Highest AACS version: 64

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

[d00zah]

got a asus 16d1ht that has 3.11 on it. am i sol? or doing something wrong?
tried reading and searching the forums but i feel like im missing something.
i have tried the powershell method trying the MK firmware pack, also the "all you need pack". both went to 100% and "done successfully" was shown. but going back into mkv the drive is still at 3.11

current MKV settings
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.11
Serial number: redacted
Firmware date: 2120-12-01 17:59
Bus encryption flags: 1F
Highest AACS version: 64

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

1st post of Ultimate UHD Drives Flashing Guide Updated 2024 will tell all.

Asus BW-16D1HT on any Firmware directly to > Asus BW-16D1HT 3.10MK

Look for "Mac/linux commands to flash."

Hint: ASUS-BW-16D1HT-3.11 is listed as encrypted, so be sure to include 'enc' in the command line.

SDFtool Flasher on Windows is the most foolproof flashing method.

[berrnard]

got a asus 16d1ht that has 3.11 on it. am i sol? or doing something wrong?
tried reading and searching the forums but i feel like im missing something.
i have tried the powershell method trying the MK firmware pack, also the "all you need pack". both went to 100% and "done successfully" was shown. but going back into mkv the drive is still at 3.11

current MKV settings
Drive Information
OS device name: \Device\CdRom0
Current profile: BD-ROM
Manufacturer: ASUS
Product: BW-16D1HT
Revision: 3.11
Serial number: redacted
Firmware date: 2120-12-01 17:59
Bus encryption flags: 1F
Highest AACS version: 64

LibreDrive Information
Status: Possible, not yet enabled
Drive platform: MT1959

1st post of Ultimate UHD Drives Flashing Guide Updated 2024 will tell all. yep and i read that a couple times. i guess im missing something

Asus BW-16D1HT on any Firmware directly to > Asus BW-16D1HT 3.10MK

Look for "Mac/linux commands to flash." why would i use mac/linux commands on windows?

Hint: ASUS-BW-16D1HT-3.11 is listed as encrypted, so be sure to include 'enc' in the command line. I did

SDFtool Flasher on Windows is the most foolproof flashing method.

i get errors when i try that, thats why i did the powershell/cmd way. again that said it was successful.

[d00zah]

i get errors when i try that, thats why i did the powershell/cmd way. again that said it was successful.

Tried what, exactly? What errors?

Ensure no disc in tray, tray closed.

[berrnard]

i get errors when i try that, thats why i did the powershell/cmd way. again that said it was successful.

Tried what, exactly? What errors?

Ensure no disc in tray, tray closed.

tried the sdflasher and it was giving an error
ran the firmware with powershell like in: How To Flash Videos and commands:

New Updated guide for all Drives and firmware including encrypted firmware: https://www.youtube.com/watch?v=jyQV1aPlbow


that was successful but mkv still reported 3.11

i just re-ran the sdflasher and firmware took. now mkv is reporting 3.10, so i guess im all good now.
thanks for the responses

[d00zah]

Have fun!