Another question.
Could I use this case to flash the drive??
https://www.amazon.de/dp/B072WJCR9M/ref ... UTF8&psc=1
Are these flashable for UHD friendly?
Re: Are these flashable for UHD friendly?
Hi,
My drive with fw 1.03 is defective. The new drive from Amazon has the fw 1.04.
Could i use the HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin from the mk-firmware-pack-20200720??
Are these the correct steps?
1. Flash (sdftool)with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, no "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
3. Reboot PC or simply disconnect drive for 10 seconds if using USB connection.
My drive with fw 1.03 is defective. The new drive from Amazon has the fw 1.04.
Could i use the HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin from the mk-firmware-pack-20200720??
Are these the correct steps?
1. Flash (sdftool)with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, no "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
3. Reboot PC or simply disconnect drive for 10 seconds if using USB connection.
-
- Posts: 4119
- Joined: Sun Aug 24, 2014 5:49 am
Re: Are these flashable for UHD friendly?
If you can't follow the guide just buy a premade flasher.Freaky69 wrote: ↑Sat May 29, 2021 4:40 pmHi,
My drive with fw 1.03 is defective. The new drive from Amazon has the fw 1.04.
Could i use the HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin from the mk-firmware-pack-20200720??
Are these the correct steps?
1. Flash (sdftool)with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, no "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
3. Reboot PC or simply disconnect drive for 10 seconds if using USB connection.
Your steps are wrong.
And what was your last drive doing that made it defective?
If it was time out on logical unit it's not defective it means your usb ports were not giving enough power.
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Re: Are these flashable for UHD friendly?
The drive itself doesn’t get an power at all. Tried it also on my external Charing device for tablets and phones (Anker). Didn’t work their either.
-
- Posts: 4119
- Joined: Sun Aug 24, 2014 5:49 am
Re: Are these flashable for UHD friendly?
Same with new drive?
If so your usb case is probably bad
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
Re: Are these flashable for UHD friendly?
I have to check that. I need a new case before ![Wink ;)](./images/smilies/icon_wink.gif)
![Wink ;)](./images/smilies/icon_wink.gif)
Re: Are these flashable for UHD friendly?
The case did arrive yesterday and i flashed the drive like that:
1. Flash with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
But on end of every step i got a error message. Makemkv shows me the 1.00 FW and i can rip UHDs.
But i got now 2 UHDs which doesn't work ripping (but the ASUS did rip them correctly).
Should i flash the drive again maybe?
1. Flash with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
But on end of every step i got a error message. Makemkv shows me the 1.00 FW and i can rip UHDs.
But i got now 2 UHDs which doesn't work ripping (but the ASUS did rip them correctly).
Should i flash the drive again maybe?
-
- Posts: 4119
- Joined: Sun Aug 24, 2014 5:49 am
Re: Are these flashable for UHD friendly?
What are the errors?Freaky69 wrote: ↑Sat Jun 05, 2021 3:26 pmThe case did arrive yesterday and i flashed the drive like that:
1. Flash with HL-DT-ST-BD-RE_BU40N-1.04-NM00500-212005061142.bin, using SDFtool Flasher, "enc?" required.
2. Flash with DE BU40N 1.00 using SDFtool Flasher, no "enc?" required.
But on end of every step i got a error message. Makemkv shows me the 1.00 FW and i can rip UHDs.
But i got now 2 UHDs which doesn't work ripping (but the ASUS did rip them correctly).
Should i flash the drive again maybe?
I'm guessing you USB port is not giving it enough power and your getting device not available or timeout on logical unit errors
Buy a UHD drive from the guide and how to video maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com
UHD Drives Guide: https://www.makemkv.com/forum/viewtopic ... 16&t=19634
Auto flash kit $25 Email me for one Billycar5924@gmail.com