Page 1 of 1

Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' when reading 4K UHD BluRay

Posted: Tue Nov 25, 2025 10:10 pm
by bryanvh
Hi everyone. I've found other threads about errors like this but they're generally old and lacking answers and I didn't want to necro one of those.

I'm getting these errors all of a sudden when trying to rip a UHD Blu Ray. The Blu Ray drive has been acting fine ripping other Blu Rays, even UDH ones (LibreDrive firmware properly installed and UHD support enabled and working). So, this almost suggests it's a disk specific issue. But, the weird part is that it's just one disk in a box set of LoTR so I can't imagine why the others are reading fine and this one isn't.

Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB'
and
Error 'OS error - The specified request is not a valid operation for the target device'

I'll attach the log from the rip. But, I'm sort of at a loss. Is there anything to try or anything that stands out as a culprit based on the logs? Thanks in advance and sorry if this is just basically chasing gremlins.
(Windows (sadly), MakeMKV running as admin,UHD reads working, other disks working)
LoTR 3 Read error.txt
(58.56 KiB) Downloaded 33 times

Re: Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' when reading 4K UHD BluRay

Posted: Tue Nov 25, 2025 10:49 pm
by MartyMcNuts
bryanvh wrote:
Tue Nov 25, 2025 10:10 pm
Hi everyone. I've found other threads about errors like this but they're generally old and lacking answers and I didn't want to necro one of those.

I'm getting these errors all of a sudden when trying to rip a UHD Blu Ray. The Blu Ray drive has been acting fine ripping other Blu Rays, even UDH ones (LibreDrive firmware properly installed and UHD support enabled and working). So, this almost suggests it's a disk specific issue. But, the weird part is that it's just one disk in a box set of LoTR so I can't imagine why the others are reading fine and this one isn't.

Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB'
and
Error 'OS error - The specified request is not a valid operation for the target device'

I'll attach the log from the rip. But, I'm sort of at a loss. Is there anything to try or anything that stands out as a culprit based on the logs? Thanks in advance and sorry if this is just basically chasing gremlins.
(Windows (sadly), MakeMKV running as admin,UHD reads working, other disks working)

LoTR 3 Read error.txt
Start by cleaning the disc, even if new.

Re: Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' when reading 4K UHD BluRay

Posted: Mon Dec 01, 2025 4:28 pm
by bryanvh
Thanks! I wouldn't have through that new disks would have needed it. I cleaned it and the error moved from ~4 million position to ~8 million position, but it still failed. Played with it a lot more, including a few more cleanings, but this thing was determined to fail no matter what.

Guess it was just a bad burn on the manufacturing side. Woo for statistical possibilities. Haha

Re: Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' when reading 4K UHD BluRay

Posted: Mon Dec 01, 2025 8:16 pm
by Woodstock
"New disks" is relative. I've found it more frequent that disks that were released 6 months ago have acquired a film from their packaging that prevents "error free" reading, and it needs to be cleaned off.

Re: Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' when reading 4K UHD BluRay

Posted: Fri Dec 12, 2025 6:56 pm
by rjnichols
Started seeing this a lot on my older 4K disks that ripped fine when they were new but second time around a few months later they fail. No visible surface errors. All the failed disks play perfectly on my standalone Panasonic UB9000 so I guess this player has some sort of error correction or just skips failed sectors.

Wonder if makemkv could implement an option to skip unreadable bits and carry on like standalone players must be doing.

Log file attached.