BP60NB10 Revision 1.02 4k UHD Failing to Decrypt

[MTGplayer]

I have been using MakeMKV for a little while now and I've been able to usually find the answers to my questions after some digging.
I've been able to to other 4k's in the past. It's been a little over a year since my last time I have ripped anything.
I am currently trying to rip Wicked Part I and after everything I've done, I've been given the same video can't be decrypted and failed to open disc prompt.
I have an LG BP60NB10 that I purchased in 2023. I've reflashed to 1.02 and ensured I had enc in the prompt, I've uninstalled and reinstalled the app and reflashed again.

Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Serial number:
Firmware date: 2120-05-07 09:35
Bus encryption flags: 17
Highest AACS version: 77

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.02
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

I've looked in the AACS tgz dump log file, and after it try's to "load content hash table, will verify intgrity of M2TS files" it starts with the can't decrypt
What am I doing wrong?

[MartyMcNuts]

I have been using MakeMKV for a little while now and I've been able to usually find the answers to my questions after some digging.
I've been able to to other 4k's in the past. It's been a little over a year since my last time I have ripped anything.
I am currently trying to rip Wicked Part I and after everything I've done, I've been given the same video can't be decrypted and failed to open disc prompt.
I have an LG BP60NB10 that I purchased in 2023. I've reflashed to 1.02 and ensured I had enc in the prompt, I've uninstalled and reinstalled the app and reflashed again.

Drive Information
OS device name: E:
Current profile: BD-ROM
Manufacturer: HL-DT-ST
Product: BD-RE BP60NB10
Revision: 1.02
Serial number:
Firmware date: 2120-05-07 09:35
Bus encryption flags: 17
Highest AACS version: 77

LibreDrive Information
Status: Enabled
Drive platform: MT1959
Firmware type: Patched (microcode access re-enabled)
Firmware version: 1.02
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

I've looked in the AACS tgz dump log file, and after it try's to "load content hash table, will verify intgrity of M2TS files" it starts with the can't decrypt
What am I doing wrong?

Copy & paste the actual log window messages so we can try to help you.

[MTGplayer]

Below is what I receive anytime I try and read the disc.

Debug log started at Fri Jun 27 20:57:23 2025 , written by MakeMKV v1.18.1 win(x64-release)
001005:0000 MakeMKV v1.18.1 win(x64-release) started
Using 262272KB for read cache.
WinCdArb=v1.2.0_tiny win(x64-release)
DEBUG: Code 3 at u%~+41nw7Z$>\(rT@7Hdjpjz:29395310
SDF v098: HL-DT-ST_BD-RE_BP60NB10_1.02_212005070935_SIK09O58A5635
DEBUG: Code 3 at u%~+41nw7Z$>\(rT@7Hdjpjz:29395310
SDF v098: HL-DT-ST_BD-RE_BP60NB10_1.02_212005070935_SIK09O58A5635
001011:0000 Using LibreDrive mode (v06.3 id=4C194CE2C4D1)
003007:0000 Using direct disc access mode
005085:0000 Loaded content hash table, will verify integrity of M2TS files.
DEBUG: Code 2147483648 at 2g`y)1d*msr{}#Bb:121265499
DEBUG: Code 0 at 2g`y)1d*msr{}#Bb:121268443

[MartyMcNuts]

Below is what I receive anytime I try and read the disc.

Debug log started at Fri Jun 27 20:57:23 2025 , written by MakeMKV v1.18.1 win(x64-release)
001005:0000 MakeMKV v1.18.1 win(x64-release) started
Using 262272KB for read cache.
WinCdArb=v1.2.0_tiny win(x64-release)
DEBUG: Code 3 at u%~+41nw7Z$>\(rT@7Hdjpjz:29395310
SDF v098: HL-DT-ST_BD-RE_BP60NB10_1.02_212005070935_SIK09O58A5635
DEBUG: Code 3 at u%~+41nw7Z$>\(rT@7Hdjpjz:29395310
SDF v098: HL-DT-ST_BD-RE_BP60NB10_1.02_212005070935_SIK09O58A5635
001011:0000 Using LibreDrive mode (v06.3 id=4C194CE2C4D1)
003007:0000 Using direct disc access mode
005085:0000 Loaded content hash table, will verify integrity of M2TS files.
DEBUG: Code 2147483648 at 2g`y)1d*msr{}#Bb:121265499
DEBUG: Code 0 at 2g`y)1d*msr{}#Bb:121268443

There should be more to the log than that!!

Are you letting Windows initialize the disc before opening MakeMKV? If not, you should be.