possible issue with Dolby Vision Blurays
Posted: Sun Dec 13, 2020 7:41 pm
This has also been reported to TSMuxer:
Using tsmuxer from 12/12/20 daily build (git-943a735) - but earlier builds exhibit this also.
Get a dolby video UDH 4K disk (doesn't matter - seems to happen on them all).
If you use makemkv to create an mkv - everything works fine.
Now - use tsmuxer and demux the 2 video streams.
Then - use tsmuxer to remux the 2 streams into a bluray disk.
Now use makemkv to extract an mkv from that disk - You get timecode errors - seems to always be at 47:47.573 where it starts, which is suspicious.
AV synchronization issues were found in file 'V:/Video/test1/title_t00.mkv' (title #1)
AV sync issue in stream 0 at 0:47:47.573 : video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.573 : secondary stream video frame timecode differs by -83.511ms
AV sync issue in stream 0 at 0:47:47.739 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.739 : secondary stream video frame timecode differs by +41.611ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by +166.733ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by +83.322ms
AV sync issue in stream 0 at 0:47:48.240 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:48.240 : secondary stream video frame timecode differs by +41.611ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by +166.733ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by +83.322ms
AV sync issue in stream 0 at 0:47:48.740 : secondary stream video frame timecode differs by -0.1ms
All future frames have this "issue".
Unclear if this actually causes a DV problem but it seems really wierd.
if I extract the streams (using tsmuxer) from this re-created bluray - they're exactly the same as the original streams that were used to mux the bluray (as one would expect). So this means there's something slightly different about the muxed bluray that makemkv sees as timecode variances (I'm assuming somehow the timecodes of the 4K and the 1080p streams got out of sync), but how they're "fixed" on re-extraction is a bit bizarre.
Using tsmuxer from 12/12/20 daily build (git-943a735) - but earlier builds exhibit this also.
Get a dolby video UDH 4K disk (doesn't matter - seems to happen on them all).
If you use makemkv to create an mkv - everything works fine.
Now - use tsmuxer and demux the 2 video streams.
Then - use tsmuxer to remux the 2 streams into a bluray disk.
Now use makemkv to extract an mkv from that disk - You get timecode errors - seems to always be at 47:47.573 where it starts, which is suspicious.
AV synchronization issues were found in file 'V:/Video/test1/title_t00.mkv' (title #1)
AV sync issue in stream 0 at 0:47:47.573 : video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.573 : secondary stream video frame timecode differs by -83.511ms
AV sync issue in stream 0 at 0:47:47.739 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.739 : secondary stream video frame timecode differs by +41.611ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by +166.733ms
AV sync issue in stream 0 at 0:47:47.906 : secondary stream video frame timecode differs by +83.322ms
AV sync issue in stream 0 at 0:47:48.240 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:48.240 : secondary stream video frame timecode differs by +41.611ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by -0.1ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by +166.733ms
AV sync issue in stream 0 at 0:47:48.407 : secondary stream video frame timecode differs by +83.322ms
AV sync issue in stream 0 at 0:47:48.740 : secondary stream video frame timecode differs by -0.1ms
All future frames have this "issue".
Unclear if this actually causes a DV problem but it seems really wierd.
if I extract the streams (using tsmuxer) from this re-created bluray - they're exactly the same as the original streams that were used to mux the bluray (as one would expect). So this means there's something slightly different about the muxed bluray that makemkv sees as timecode variances (I'm assuming somehow the timecodes of the 4K and the 1080p streams got out of sync), but how they're "fixed" on re-extraction is a bit bizarre.