So with that P7 file , you're saying you're getting a green screen?
v1.5.9 actually removes mapping blindly as soon as it detect P7 regardless of MEL/FEL, so when the input is P7, the output will always be P8 without mapping.
In v1.6.0, the mapping will be removed only when the script detect FEL input. (also speed improvement)
So with that P7 file , you're saying you're getting a green screen?
v1.5.9 actually removes mapping blindly as soon as it detect P7 regardless of MEL/FEL, so when the input is P7, the output will always be P8 without mapping.
In v1.6.0, the mapping will be removed only when the script detect FEL input. (also speed improvement)
Hello everyone I hope someone can help me I start the script and take these options 7-1-2 at the end I always get this message Error: The file 'E:\lost\DoVi_Scripts_1.5.6_TOOLS\DoVi_Scripts\\TEMP_folder\en.dts' could not be opened for reading: open file error.
Source file "E:\lost\DoVi_Scripts_1.5.6_TOOLS\DoVi_Scripts\\TEMP_folder\au.mkv" not found.
muxing into a MP4 profile 8 DoVi file. Be patient, it can take a while. 40min+ on slow HDD!
ERRORS! Can't open input file: E:\lost\DoVi_Scripts_1.5.6_TOOLS\DoVi_Scripts\\TEMP_folder\audio.ac3
Error parsing command line! I've tried several times now but without success
yeah so many problems when the script is on a C:\ drive that I can't reproduce on my system. If you can, use the script on a non-windows drive. Not only it will be faster but you wont slow down your PC.
In your picture, it fails to detect if the input is dual tracks so if your input is single track, you can ignore it.
you can also try v1.6.0.beta.2. that i just posted here. I changed the temp folder behavior, maybe that will fix your problem
yeah so many problems when the script is on a C:\ drive that I can't reproduce on my system. If you can, use the script on a non-windows drive. Not only it will be faster but you wont slow down your PC.
In your picture, it fails to detect if the input is dual tracks so if your input is single track, you can ignore it.
you can also try v1.6.0.beta.2. that i just posted here. I changed the temp folder behavior, maybe that will fix your problem
yeah, i used a extern hdd before for this process without problems. i didn't expect that the C station don't work, learned again. thank you i gonna try you're new version.
Try to run DoVi Scripts from another drive. Not from your system C:
The same happened to me and it solved. I still got error message but I can find the picture in the output folder.
Hi! I wanted AAC-LC audio, you will be able to create a new mode 7/4/8 Bluray Disc to Profile "5" + AAC-LC Quality 5.
Since PCM 32 bit is a lot of scales to spend, it would be better to AAC-LC it's good quality than EAC3.
Hi,
@RESET_9999,
could it be possible to implement in muxing path (7,1,1) information about audio delay (negative/positive) due to fact that other audio languages could have some delays.
I mean to be possible to set delay for audio before muxing mp4 file with DV.
Hi! I wanted AAC-LC audio, you will be able to create a new mode 7/4/8 Bluray Disc to Profile "5" + AAC-LC Quality 5.
Since PCM 32 bit is a lot of scales to spend, it would be better to AAC-LC it's good quality than EAC3.
right, DEE applies some DRC and it can't be disabled. It also inverts the side and back channels. What a joke Dolby, you're really the new Apple...
I'll look into adding an AAC 7.1 workflow but my only problem is that the LG TVs only support 5.1 channels with AAC tracks. https://drive.google.com/file/d/10VPaqP ... sp=sharing
Also, have you tried the new workflow that use plex Easy Audio Encoder EAC3 7.1.
Hi,
@RESET_9999,
could it be possible to implement in muxing path (7,1,1) information about audio delay (negative/positive) due to fact that other audio languages could have some delays.
I mean to be possible to set delay for audio before muxing mp4 file with DV.
yes this is something I wanted to implement but I forgot about it.
Hi! I wanted AAC-LC audio, you will be able to create a new mode 7/4/8 Bluray Disc to Profile "5" + AAC-LC Quality 5.
Since PCM 32 bit is a lot of scales to spend, it would be better to AAC-LC it's good quality than EAC3.
right, DEE applies some DRC and it can't be disabled. It also inverts the side and back channels. What a joke Dolby, you're really the new Apple...
I'll look into adding an AAC 7.1 workflow but my only problem is that the LG TVs only support 5.1 channels with AAC tracks. https://drive.google.com/file/d/10VPaqP ... sp=sharing
I have LG 1C eARC SN11R, PCM 8 channels to play only music and no voice, there are 6 channels left sleeping. FLAC 8 channels, only music and no voice, there are 6 channels left sleeping. AAC-LC and EAC3 full channels 8 and 6 to play. No plex, I have a website using the browser DASH and HLS.
Last edited by legosoff on Fri Sep 30, 2022 6:09 am, edited 3 times in total.
Been using the EAE option (6.3.8 ) to create EAC 7.1 tracks at 1024kbps and it seems to be working well. Thanks
Noticed the output looks like filename_7.1_.ec3
Just curious so I looked at Workflow.8 and it wants to put %bitrate% after the last underscore, but I don't see where it's supposed to get bitrate from which is always null. Internally it seems to default to 1024 just fine, so it's just the filename I guess
I have LG 1C eARC SN11R, PCM 8 channels to play only music and no voice, there are 6 channels left sleeping. FLAC 8 channels, only music and no voice, there are 6 channels left sleeping. AAC-LC and EAC3 full channels 8 and 6 to play. No plex, I have a website using the browser DASH and HLS. https://cinemahd-deaf.org/ https://radikal.host/i/2022-09-29-15-20-07.aoIOO
did you try the channel test mkv I just shared?
On my LG C2, all the audio tracks pass the 7.1 test except AAC.
Also, the C2 EDID reports AAC support at max 5.1 while EAC3 it says 7.1.
Been using the EAE option (6.3.8 ) to create EAC 7.1 tracks at 1024kbps and it seems to be working well. Thanks
Noticed the output looks like filename_7.1_.ec3
Just curious so I looked at Workflow.8 and it wants to put %bitrate% after the last underscore, but I don't see where it's supposed to get bitrate from which is always null. Internally it seems to default to 1024 just fine, so it's just the filename I guess
yeah i forgot to remove the bitrate user input. Bitrate will always be 1024kbps with EAE...
did you try the beta3 1.6.0 ? I also added a cmd that lists the stream ID so you can choose the right one. https://drive.google.com/file/d/1L3oMCJ ... sp=sharing
