Dolby Vision now possible through MP4 Mux.

[RESET_9999]

just look on the Resolve media page, and you will find the framecount of the prores file.
Then in the xml, modify the duration of the last shot(probably just 57 or 55) to match that framecount.

How to fix the RPU mismatch problem?

[Rororororo]

some combination in the new MODE.I (1) in 3.0.0/3.0.1 seems not to work like "DF", the section with options is a bit confusing and could be a bit more readable, also what are valves v and 7?

-------------------------------------------------------------------------------------------------------------------
*You can select more than one value(except: e/m/p/s/7/v) but no space between values: EG: 569r4 (default= Exit)
L5=5/L6=6/L9=9/Resync=R or D/SC_Flag=F/RemCMV4=4 - /PLOT=P/CheckSync=S/Read=E/Metafier=M/Exit=X
-------------------------------------------------------------------------------------------------------------------
DF

Processing "Thor The Dark World (November 2013) 4K DV8_RPU - Copy.bin"

Exporting Scene cuts...

Parsing RPU file...
Exporting scenes list...
Done.
Check "G:\dovi\3.0.0\Thor The Dark World (November 2013) 4K DV8_RPU - Copy_scene-cuts.txt" and select if you have to add or remove a refresh flag(s)...

Do you want to add or remove scene_refresh_flag? choices are Add=a and Remove=r and press enter...
a

Which frames do you want to add a scene cut flag? (inclusive, default=0 1st frame)


Adding a Scene Cut flag at frame 0

Done.

1 file(s) copied.
Deleting TEMP folder...

The script has been completed. Do you want to quit or go back to main menu (q or m default=q)?

edit:
some other bugs, clicking any button at the end after extracting RPU from the stream, starts the extraction process again

[RESET_9999]

some combination in the new MODE.I (1) in 3.0.0/3.0.1 seems not to work like "DF"

Right you cant resync and edit the scene cut at the same time and I didn't write it in the exception because you can select 569f or 569d but not 569fd

the section with options is a bit confusing and could be a bit more readable

I wanted the options to all show up in a single line, and i got used to it, you will too. Feel free to tell me if you have a better idea.

also what are valves v and 7?

7 = P7 to P8 (redirect to 4-1) This choice will only show up if your input is a P7 video
v = remover (redirect to 2-2) This choice will only show up if your input is a video file, you cant remove DV from a RPU input

some other bugs, clicking any button at the end after extracting RPU from the stream, starts the extraction process again

fixed in beta

[Rororororo]

I wanted the options to all show up in a single line, and i got used to it, you will too. Feel free to tell me if you have a better idea.

I'd at least separate them with spaces rather than slashes, swap the value with the description and use one letter case.

Thanks for clarifications.

[RESET_9999]

I'd at least separate them with spaces rather than slashes, swap the value with the description and use one letter case.

this should be better:

[Arq231]

just look on the Resolve media page, and you will find the framecount of the prores file.
Then in the xml, modify the duration of the last shot(probably just 57 or 55) to match that framecount.

How to fix the RPU mismatch problem?

Do I only need to modify the duration for the last scene??
Also how can I re-encode the remux while retaining the Dolby Vision metadata? Which software allows this?

[RESET_9999]

Do I only need to modify the duration for the last scene??

yes

Also how can I re-encode the remux while retaining the Dolby Vision metadata? Which software allows this?

encoding scripts in my signature.

[Rororororo]

I'd at least separate them with spaces rather than slashes, swap the value with the description and use one letter case.

this should be better:

That's better IHMO.

Would be possible to add an option for batch extraction or metafier procceses etc?

[RESET_9999]

Would be possible to add an option for batch extraction or metafier procceses etc?

I think you can already do that.
if you input a folder and select ''E'' in Mode.I (1), it should redirect to the batch L1 plotter workflow (6-3) which can batch extract.

metafier: no

[deadchip12]

@RESET_9999

I'm trying the latest version of Dovi_Scripts to see if the workflow for injecting stream's DV cmv4.0 into bluray's DV cmv2.9/HDR10 is any different. Have a few questions:

1) Workflow 6-4: now running it with the stream video file produces additional 2 graphs which are L8.HUE.Vector.Field.PLOT and L8.Saturation.Vector.Field.PLOT. What are these used for?

2) Workflow 2-4 in the old version is used to find frame difference between the bluray and stream file, but now it's no longer there? What is the workflow now?

Would be great if you can update the tutorial videos. Thanks.

[RESET_9999]

if the workflow for injecting stream's DV cmv4.0 into bluray's DV cmv2.9/HDR10 is any different.

it's not

2) Workflow 2-4 in the old version is used to find frame difference between the bluray and stream file, but now it's no longer there? What is the workflow now?

it's now workflow 9-1

1) Workflow 6-4: now running it with the stream video file produces additional 2 graphs which are L8.HUE.Vector.Field.PLOT and L8.Saturation.Vector.Field.PLOT. What are these used for?

They are the extra control for color saturation and hue in cmv4.0. Used mostly for fine-tuning the colors in 100nits trim pass.

[Rororororo]

Would be possible to add an option for batch extraction or metafier procceses etc?

I think you can already do that.
if you input a folder and select ''E'' in Mode.I (1), it should redirect to the batch L1 plotter workflow (6-3) which can batch extract.

metafier: no

Yeah, I tried that before posting and it didn't work in both 3.0.0 and 3.0.1, only extracted from the first mkv in the folder

[RESET_9999]

It works in the latest beta, I just tried it.

[deadchip12]

if the workflow for injecting stream's DV cmv4.0 into bluray's DV cmv2.9/HDR10 is any different.

it's not

2) Workflow 2-4 in the old version is used to find frame difference between the bluray and stream file, but now it's no longer there? What is the workflow now?

it's now workflow 9-1

Thanks. What is the workflow for exporting scene cuts now? It was 2-3 before.

[RESET_9999]

2-1 or 1-s