Since about a year, I had very few problems using MakeMKV in combination with my DVD-readers (an ASUS BlueRay reader, a Verbatim HL-dvd reader and a TSST D100 reader).
Unfortunately, my HL-dvd reader recently went completely dead, so I bought a new TSST D500 DVD reader.
This new reader causes problems. It keeps spitting out almost all discs that are perfectly fine. MakeMKV tries to load the disc, but after 15 seconds or so, the dvd-reader ejects the disc.
I have tried setting autoplay = off in the Windows device settings, which hasn't caused any problems so far, but it doesn't solve the problem.
Strangely enough, in a few cases (1 out of 10) it actually works and much faster than my other TSST D100.
Is there a quick fix for this problem or should I return the item and try some other dvd-reader?
Sorry if I posted in the wrong forum, but as far as I know this isn't a UHD or Libre drive.
MakeMKV version is v1.17.4 (win(x64-release))
New TSST D500 DVD Reader spits out every DVD disc
New TSST D500 DVD Reader spits out every DVD disc
Last edited by RAHRL on Mon Nov 25, 2024 6:16 pm, edited 1 time in total.
Re: New TSST D500 DVD Reader spits out every DVD disc
Problem seems solved, the dvd-reader needed a second USB-cable, for some reason (additional power?)
Re: New TSST D500 DVD Reader spits out every DVD disc
Unfortunately, problem not solved. When I select Open Disc from the menu, MakeMKV tries reading the disc, but after a while, it says “No Disc”, with the log showing the following error:
ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
Sometimes it works well, but in most cases it doesn’t. Re-inserting the disc does not solve the problem.
VLC Player has no problems playing the disc, even after MakeMKV failed.
My two other dvd-readers still work fine.
ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
Sometimes it works well, but in most cases it doesn’t. Re-inserting the disc does not solve the problem.
VLC Player has no problems playing the disc, even after MakeMKV failed.
My two other dvd-readers still work fine.
Re: New TSST D500 DVD Reader spits out every DVD disc
It feels a bit like I’m talking to a brick wall, but I have some additional info.
First, I upgraded to the newest MakeMKV version (v1.17.8 ), but there was no noticeable improvement. It did not solve the problem. Some discs rip ok, but on others I still get the message:
ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
Secondly, I have tried several discs that failed in the new D500 reader and tried them in the old D100 reader. Each and everyone ripped fine.
So, as a complete non-expert on the internals of MakeMKV, let me speculate on the reason for the problem.
It cannot be the MakeMKV software nor the disc, because a disc that fails in the D500 reader, rips successfully in the D100 reader with the same software. So there must be some kind of protection/authorisation problem in the new D500 reader (or the driver) that prevents MakeMKV from reading a particular sector of the disc.
For some reason VLC Player, which also works ok on the D500 reader, does not encounter this problem when playing the disc, because it does not do that same operation on that specific sector of the disc.
I have seen reports of the pertained error message on this forum that go back to 2019, but I could not discern a clear fix for the problem.
First, I upgraded to the newest MakeMKV version (v1.17.8 ), but there was no noticeable improvement. It did not solve the problem. Some discs rip ok, but on others I still get the message:
ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
Secondly, I have tried several discs that failed in the new D500 reader and tried them in the old D100 reader. Each and everyone ripped fine.
So, as a complete non-expert on the internals of MakeMKV, let me speculate on the reason for the problem.
It cannot be the MakeMKV software nor the disc, because a disc that fails in the D500 reader, rips successfully in the D100 reader with the same software. So there must be some kind of protection/authorisation problem in the new D500 reader (or the driver) that prevents MakeMKV from reading a particular sector of the disc.
For some reason VLC Player, which also works ok on the D500 reader, does not encounter this problem when playing the disc, because it does not do that same operation on that specific sector of the disc.
I have seen reports of the pertained error message on this forum that go back to 2019, but I could not discern a clear fix for the problem.