4K BDAV DISC recorded on a Panasonic Blu-ray recorder cannot be ripped

[nobusan7]

MakeMKV 1.17.3 for Windows does not correctly rip 4K BDAV DISC recorded on a Panasonic Blu-ray recorder (model: DIGA DMR-4W400).
If there is only 4K contents in one DISC, it cannot be ripped. Backups end without any errors, but it seems that the video files are not decrypted.
However, if I mix 4K contents and 2K contents in one DISC, the 4K contents can be ripped. One title is sufficient for this 2K content, and it can be of any length. the 4K and 2K content can be in any order. Of course, the 2K content can be ripped as well.

The symptoms are almost the same for all three BD drives listed below.

* BD Drive No.1
Drive Information
OS device name: P:
Current profile: BD-RE
Manufacturer: PIONEER
Product: BD-RW BDR-213U
Revision: 1.01
Serial number: BBDL000626WL
Firmware date: 2021-08-19
Bus encryption flags: 1B
Highest AACS version: 76

LibreDrive Information
Status: Enabled
Drive platform: RS9201
Firmware name: PIONEER BDR-213T
Firmware type: Original (unpatched)
Firmware version: 1.01/ID58
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes


* BD Drive No.2
Drive Information
OS device name: H:
Current profile: BD-RE
Manufacturer: HL-DT-ST
Product: BD-RE BH10NS30
Revision: EL00
Serial number: K9OA6350852
Firmware date: 2010-04-05 12:34:56
Highest AACS version: 76

LibreDrive Information
Status: Possible, might be supported in future, but not likely soon
Drive platform: RS1013
Firmware version: EL00-09


* BD Drive No.3
Drive Information
OS device name: L:
Current profile: BD-RE
Manufacturer: ATAPI
Product: iHBS312 2
Revision: PL12
Serial number: 3772512080 216146500959
Bus encryption flags: 1E
Highest AACS version: 76

LibreDrive Information none.


* Recorded BDAV disc
Disc Information
Label: DVD_VIDEO_RECORDER
Timestamp: 2023-02-07 23:15:04
Protection: AACS v76
Data capacity: 22.55 Gb
Disc type: BD-RE
Number of layers: 1
Channel bit length: 74,5 nm (25.0 GB max. per layer)


However, as additional information, the Pioneer drive, which is the LibreDrive mentioned above, gives the following error message when ripping is successful.

Error 'Scsi error - ILLEGAL REQUEST:SYSTEM RESOURCE FAILURE' occurred while issuing SCSI command A40..002000800 to device 'SPTI:\Device\CdRom0'

When ripping fails, on the contrary, there is no error message.
By the way, the other two BD drives do not give any error messages when ripping succeeds or fails.

Do you know the cause of this problem?