Ok, so I have a bunch of HD DVDs that I want to rip, and MakeMKV seems ideal for this.
first off, I'm getting the "VC-1 video stream without TFCNTR information is not supported, sorry. Few HD-DVDs use it anyway.
Failed to decode audio/video data for title #0 - invalid mux or internal error, title skipped." message on all my HD DVDs. Granted, I've only tried V or Vendetta, Clerks 2, 40 Year Old Virgin and Red Dragon, but that seems like an impressive streak. So on that note, can someone tell me a confirmed-rippable HD DVD that I can test with?
Second issue, I'm not getting audio on any of the other files, either. The commentary and deleted scenes are not VC-1, but there's still no audio in the ultimate MKV (unless I'm misunderstanding something, which could be the case).
I'm also getting this error: FAILURE: Code 0 at 3eJwfP8<)RZ#AA,n_k:213132606 after it tells me all about the VC-1 no-support. (this was on the 40 Year Old Virgin, I did not have logging turned on yet for the other movies)
I'm using the XBox 360 HD DVD drive on a Vista 32-bit computer.
Not getting any sound in MKV files
Re: Not getting any sound in MKV files
Just in case it helps, here's the error list I got from using MakeMKV on Clerks 2 after I had already ripped it to my computer via AnyDVD HD
Hope that helps!
Code: Select all
AACS directory not present, assuming unencrypted disc
FAILURE: Code 0 at x;#z6mzSN ]%@8n{kA`:213133250
FAILURE: Code 0 at x;#z6mzSN ]%@8n{kA`:121261888
FAILURE: Code 0 at x;#z6mzSN ]%@8n{kA`:29393838
FAILURE: Code 0 at 6"["LI2mt`Z+_?9x6][ua:121263613
FAILURE: Code 0 at nBCHhNGMB&.i:[KA[h!:29393746
FAILURE: Code 0 at tbA^bM@}vv.EC\2:121266488
Failed to decode audio/video data for title #0 - invalid mux or internal error, title skipped.
VC-1 video stream without TFCNTR information is not supported, sorry. Few HD-DVDs use it anyway.
Failed to decode audio/video data for title #11 - invalid mux or internal error, title skipped.
FAILURE: Code 0 at 3eJwfP8<)RZ#AA,n_k:213132606
FAILURE: Code 0 at 3eJwfP8<)RZ#AA,n_k:213132606
Operation sucessfully completed
Re: Not getting any sound in MKV files
I got this error for a regular dvd also. On MAC makemkv failed to open disc. But on PC, it opened disc, but the title list does not show any audio
MakeMKV v1.5.7 beta darwin(x86-release) started
Optical drive "DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E" opened in OS access mode.
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Using direct disc access mode
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Title #0 has length of 68 seconds which is less than minimum title length of 120 seconds and was therefore skipped
Complex multiplex encountered - 51 cells and 18276 VOBUs have to be scanned. This may take some time, please be patient - it can't be avoided.
Title #1 was added (51 cell(s), 2:41:38)
Error 'Posix error - Input/output error' occured while reading '/VIDEO_TS/VTS_01_1.VOB' at offset '2048'
Error 'Posix error - Input/output error' occured while reading '/VIDEO_TS/VTS_01_1.VOB' at offset '2048'
Failed to decode audio/video data for title #0 - invalid mux or internal error, title skipped.
Failed to open disc
MakeMKV v1.5.7 beta darwin(x86-release) started
Optical drive "DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E" opened in OS access mode.
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Using direct disc access mode
Error 'Posix error - Input/output error' occured while reading 'DVD+R-DL MATSHITA DVD-R UJ-857E ZA0E' at offset '1048576'
Title #0 has length of 68 seconds which is less than minimum title length of 120 seconds and was therefore skipped
Complex multiplex encountered - 51 cells and 18276 VOBUs have to be scanned. This may take some time, please be patient - it can't be avoided.
Title #1 was added (51 cell(s), 2:41:38)
Error 'Posix error - Input/output error' occured while reading '/VIDEO_TS/VTS_01_1.VOB' at offset '2048'
Error 'Posix error - Input/output error' occured while reading '/VIDEO_TS/VTS_01_1.VOB' at offset '2048'
Failed to decode audio/video data for title #0 - invalid mux or internal error, title skipped.
Failed to open disc
-
- Posts: 2136
- Joined: Wed Dec 09, 2009 1:31 pm
Re: Not getting any sound in MKV files
Hi!
What is the title and region number of this problematic DVD?
What is the title and region number of this problematic DVD?
Re: Not getting any sound in MKV files
Its a region free international dvd.
ifoedit of the ifo file showed that there is AC3 and DTS track. But when makemkv processes that file, it does not show any audio tracks.How can i send you the ifo file? Here is the attachment showing what makemkv has processed
* * * MediaInfo Mac 0.7.33.4 file analysis report.
* * * MediaInfo Mac is ©2010 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: Jun 16, 2010 6:08:14 PM PDT
Report for file: VTS_01_0.IFO
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................2
Total Subtitle Streams for this File..............1
Video Codecs Used.................................MPEG-2 Video
Audio Codecs Used.................................AC3 / DTS
SubTitle Codecs Used..............................2-bit RLE
File Format.......................................DVD Video
Total File Size...................................88.0 KiB
Video Stream #1
Codec (Human Name)................................MPEG Video
Frame Width.......................................720 pixels
Frame Height......................................480 pixels
Frame Rate........................................29.970 fps
Display Aspect Ratio..............................16:9
Video Standard....................................NTSC
Video Stream BitRate Mode.........................VBR
Audio Stream #1
Codec.............................................AC-3
Number of Audio Channels..........................6
Sampling Rate.....................................48.0 KHz
Audio Stream #2
Codec.............................................DTS
Number of Audio Channels..........................5
Sampling Rate.....................................48.0 KHz
Subtitle Stream #1
Format............................................RLE
Menu / Chapters Stream #1
ifoedit of the ifo file showed that there is AC3 and DTS track. But when makemkv processes that file, it does not show any audio tracks.How can i send you the ifo file? Here is the attachment showing what makemkv has processed
* * * MediaInfo Mac 0.7.33.4 file analysis report.
* * * MediaInfo Mac is ©2010 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: Jun 16, 2010 6:08:14 PM PDT
Report for file: VTS_01_0.IFO
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................2
Total Subtitle Streams for this File..............1
Video Codecs Used.................................MPEG-2 Video
Audio Codecs Used.................................AC3 / DTS
SubTitle Codecs Used..............................2-bit RLE
File Format.......................................DVD Video
Total File Size...................................88.0 KiB
Video Stream #1
Codec (Human Name)................................MPEG Video
Frame Width.......................................720 pixels
Frame Height......................................480 pixels
Frame Rate........................................29.970 fps
Display Aspect Ratio..............................16:9
Video Standard....................................NTSC
Video Stream BitRate Mode.........................VBR
Audio Stream #1
Codec.............................................AC-3
Number of Audio Channels..........................6
Sampling Rate.....................................48.0 KHz
Audio Stream #2
Codec.............................................DTS
Number of Audio Channels..........................5
Sampling Rate.....................................48.0 KHz
Subtitle Stream #1
Format............................................RLE
Menu / Chapters Stream #1
-
- Posts: 2136
- Joined: Wed Dec 09, 2009 1:31 pm
Re: Not getting any sound in MKV files
In addition to the lack of any audiostreams in the listing, the "50 Chapters" seems unusually high.
It would be my guess (but "Mike" will eventually have to confirm) that this DVD is not being properly decrypted by MakeMKV.
BTW - Once again, what is the title of this international DVD?
It would be my guess (but "Mike" will eventually have to confirm) that this DVD is not being properly decrypted by MakeMKV.
BTW - Once again, what is the title of this international DVD?
Re: Not getting any sound in MKV files
It has 50 chapters. This is an old movie (1950 B & W) that is digitized with color. Its an South Indian Movie (MAYA BAZAAR - COLOR)
I can upload the IFO files some where if that helps you.
To work around this, I ripped the entire DVD using DVD Shrink, then created new IFO files with ifoedit from the VOBS. Then makemkv recognized the dolby (but not dts). At least that's sufficient for me. But I lost lost of other information with the newly created ifo's by ifoedit (like some chapters were lost)
I can upload the IFO files some where if that helps you.
To work around this, I ripped the entire DVD using DVD Shrink, then created new IFO files with ifoedit from the VOBS. Then makemkv recognized the dolby (but not dts). At least that's sufficient for me. But I lost lost of other information with the newly created ifo's by ifoedit (like some chapters were lost)