Search found 40 matches

by OneDay
Wed Apr 29, 2026 10:18 pm
Forum: UHD drives
Topic: Best Internal BluRay Burner (5.25) for PC?
Replies: 12
Views: 1118

Re: Best Internal BluRay Burner (5.25) for PC?

Here a Asus BW-16D1X-U on ebay priced reasonably that has a Pioneer BDR-209

https://ebay.us/m/SniByV
by OneDay
Wed Apr 29, 2026 6:34 am
Forum: UHD drives
Topic: Best Internal BluRay Burner (5.25) for PC?
Replies: 12
Views: 1118

Re: Best Internal BluRay Burner (5.25) for PC?

Asus BW-16D1X-U are a hit and miss. If your lucky you'll get a Pioneer drive, but lately I've seen more Asus (LG WH16NS40) drives in them.
by OneDay
Tue Apr 28, 2026 6:18 pm
Forum: UHD drives
Topic: Best Internal BluRay Burner (5.25) for PC?
Replies: 12
Views: 1118

Re: Best Internal BluRay Burner (5.25) for PC?

For the Asus BW-16D1X-U shucking. Under the case there are 4 rubber feet. Peel of the two rear rubber feet. There will be a screw holes on each. You will need a screwdriver PH00 as the screw heads are small. Now use a guitar pick or something thin and slid this on both sides to loosen the top cover....
by OneDay
Sat Apr 18, 2026 11:04 pm
Forum: UHD drives
Topic: Can I crossflash a Pioneer BDR-X13 (BDR-213T) to a UHD model?
Replies: 6
Views: 1079

Re: Can I crossflash a Pioneer BDR-X13 (BDR-213T) to a UHD model?

TimkW wrote:
Sat Apr 18, 2026 5:33 pm
Just following up on this—has anyone managed to figure this out or successfully crossflash this specific model?
Did you email Billycarr11?
Worth emailing. He's been able to do wonders!!!!!
by OneDay
Sat Apr 11, 2026 2:39 am
Forum: UHD drives
Topic: I bricked my LG WH14NS40 1.03N (2018) drive... Here's my story, what I tried, with source code. Any help is appreciated!
Replies: 16
Views: 3504

Re: I bricked my LG WH14NS40 1.03N (2018) drive... Here's my story, what I tried, with source code. Any help is apprecia

NightWolve wrote:
Wed Apr 08, 2026 2:44 am
JB8 motherboard shows a May 2015 date
Both my LG WH16NS40 and LG WH16NS60 main boards have JB8 2015.05.08 printed on it. So the board is correct. Have you tried files from Downgrade Enabled Firmware V.2 folder? If you want I can work on your board if you want to send it to me.
by OneDay
Sat Apr 11, 2026 2:10 am
Forum: UHD drives
Topic: iodata says they will start making blurays drives again
Replies: 3
Views: 1364

Re: iodata says they will start making blurays drives again

From this 4K looking promising?
by OneDay
Sat Apr 11, 2026 1:03 am
Forum: UHD drives
Topic: ASUS BW-16D1X-U not reading discs anymore - advice?
Replies: 12
Views: 1995

Re: ASUS BW-16D1X-U not reading discs anymore - advice?

It should still be under warranty. If your brave enough you can open the Asus shell and get to the drive and open the drive and clean the lasers that way. On the bottom of the Asus case pell of the two rear foots . There are two screws that need to be unscrewed. Carefully prey open the shell all aro...
by OneDay
Fri Apr 10, 2026 9:58 pm
Forum: UHD drives
Topic: ASUS BW-16D1X-U not reading discs anymore - advice?
Replies: 12
Views: 1995

Re: ASUS BW-16D1X-U not reading discs anymore - advice?

What drive do you have? (mkv drive info)
From what I have observed with a pioneer drive is that when it starts making ticking sounds the laser is going or it's gone.
LG drives not sure. They been pretty strong so far.
by OneDay
Fri Apr 10, 2026 4:00 am
Forum: LibreDrive drives
Topic: Pioneer BDR-S13UBK Stopped Working
Replies: 20
Views: 20103

Re: Pioneer BDR-S13UBK Stopped Working

Externally mounted using a OWC Mercury Pro enclosure. Powered directly from the wall. The only weak link I can think of on the connection side is that I am using an OWC dock (since I don't have a USB-B to USB-C cable for my laptop). Connection flowchart (Power): 120v AC wall outlet -> Enclosure Con...
by OneDay
Thu Apr 09, 2026 5:49 am
Forum: UHD drives
Topic: I bricked my LG WH14NS40 1.03N (2018) drive... Here's my story, what I tried, with source code. Any help is appreciated!
Replies: 16
Views: 3504

Re: I bricked my LG WH14NS40 1.03N (2018) drive... Here's my story, what I tried, with source code. Any help is apprecia

I found a way to recover a drive similar BW-12B1ST-23. If i use dosflash and try to flash my stock backup it says "wrong flash state" however for whatever reason if when i type the commands and then it says erasing after i started to flash it if i keep pressing the enter key repeatedly it...
by OneDay
Mon Apr 06, 2026 9:40 pm
Forum: UHD drives
Topic: AACS host certificate error from flashed drive
Replies: 17
Views: 3400

Re: AACS host certificate error from flashed drive

So let me get this straight, after flashing the problematic drive on the other enclosure did you do a test to see if the drive could read the uhd disc on the same enclosure?
by OneDay
Mon Apr 06, 2026 8:41 pm
Forum: UHD drives
Topic: Original firmware for HL-DT-ST BD-RE BH40N (FW GA05) after failed WH16NS60 flash
Replies: 10
Views: 7825

Re: Original firmware for HL-DT-ST BD-RE BH40N (FW GA05) after failed WH16NS60 flash

Kokoro111

I have a LG WH14NS40 (built date of June 2013) that is missing the sled face plate and also a LG WH16NS40 (built date January 2015) that are collecting dust. If your located in the US I can ship it to you. You just have to pay for shipping.
by OneDay
Sat Apr 04, 2026 10:19 pm
Forum: LibreDrive drives
Topic: LibreDrive for Pioneer drives
Replies: 1949
Views: 2265750

Re: LibreDrive for Pioneer drives

i just stumbled upon this thread today. is it possible to flash my drive with its current firmware? i saw it wasnt included in the list of the first post. any possibility for the package to be updated to include my firmware? thanks in advance! Drive Information OS device name: D: Manufacturer: PION...
by OneDay
Sat Apr 04, 2026 10:14 pm
Forum: UHD drives
Topic: Flashing LG WH16NS40
Replies: 6
Views: 1957

Re: Flashing LG WH16NS40

@MartyMcNuts and @Billycar11 Thanks for the replies. Would this still be the case if I were to update the OEM firmware to a more recent one? I found this one the LG website, its from 2018 (v1.03). There's also a 2022 version (v1.05) If not then oh well, but figured I would ask and make sure. The ma...